Yard-Man 31AH553G401 사용자 설명서

8

Be familiar with all the controls and their proper operation. Know how to stop the machine

and disengage them quickly. 

•

See Figure 9 to identify all the controls described below. 

The traction control is located on the right handle. See 
Figure 9. Squeeze the traction control to engage the 
wheel drive. Release to stop.

This same lever also locks the auger control so you can 
operate the electric chute rotation switch without 
interrupting the snow throwing process. If the auger 
control is engaged simultaneously with the traction 
control, the operator can release the auger control (on 
the left handle) and the augers will remain engaged. 
Release the traction control to stop the augers and 
wheel drive (the auger control must also be released).

  Always release traction control before 

changing speeds.

The auger control is located on the left handle. 
Squeeze the clutch grip to engage the augers. Release 
to stop the snow throwing action. The traction control 
must also be released in order to stop the auger.

The shift lever is located in the center of the 
handle panel and is used to determine both 
ground speed and direction of travel. It can 
be moved into any of eight positions for 
speed and direction variations as described 
below. Always release traction control before 
changing speeds. 

Forward: Your snow thrower has six forward 
(F) speeds. Position number one (1) is the 
slowest. Position number six (6) is the 
fastest.

Reverse: Your snow thrower has two reverse (R) 
speeds. R1 is the slower, while R2 is faster.