Yard-Man E663H 사용자 설명서

8

Read, understand, and follow 

all instructions and warnings on the machine 
and in this manual before operating. 

•

Check oil level and add oil if necessary. Service the 
engine with gasoline as instructed in the separate 
engine manual packed with your snow thrower. 

Use extreme care when 

handling gasoline. Gasoline is extremely 
flammable and the vapors are explosive. 
Never fuel the machine indoors or while the 
engine is hot or running. Extinguish cigarettes, 
cigars, pipes and other sources of ignition.

 Prior to operating your snow 

thrower, read, understand and follow ALL 
instructions to perform adjustments found 
under the heading 

 on 

page 9 of this manual.

•

Attach spark plug wire to spark plug. Make certain 
the metal loop on end of the spark plug wire (inside 

the boot) is fastened securely over the metal tip on 
the spark plug.

•

Make certain the fuel cut-off valve, if your snow 
thrower is so equipped, is in OPEN position.

•

Make certain the auger and drive clutch levers are 
in the disengaged (released) position.

•

Move throttle control  to FAST (Rabbit) position. 
Insert ignition key into slot. Be certain it snaps into 
place. Do not turn key. 

•

Determine that your house wiring is a three-wire 
grounded system. Ask a licensed electrician if you 
are not certain.

•

If your house wiring system is not a three-wire 
grounded system, do not use this electric starter 
under any conditions.

The electric starter is

equipped with a grounded three-wire power
cord and plug and is designed to operate on
120 volt AC household current. It must be
used with a properly grounded three-prong
receptacle at all times to avoid the possibility
of electric shock. Follow all instructions
carefully prior to operating the electric starter.