Troy-Bilt 2690XP 사용자 설명서

To remove and replace your snow thrower’s auger belt, proceed 

as follows:
1. 

Allow the engine to run until it is out of fuel. Do not 

attempt to pour fuel from the engine. Remove the key to 

avoid unintended starting.

2. 

Remove the plastic belt cover on the front of the engine by 

removing the two self-tapping screws. See Figure 7-1.

3. 

Roll the auger belt off the engine pulley. See Figure 7-2.

4. 

Carefully pivot the snow thrower up and forward so that it 

rests on the auger housing. 

5. 

Remove the frame cover from the underside of the snow 

thrower by removing the self-tapping screws which secure 

it. See Figure 7-3.