Lg Electronics 3803 사용자 설명서
GENERAL SAFETY SUMMARY
Review the following safety precautions to avoid operator's injury and loss of life and prevent
damage and deterioration to this instrument. To avoid potential hazards, use this product as
specified.
damage and deterioration to this instrument. To avoid potential hazards, use this product as
specified.
WARNING
■
Warnings on the Cases and Panels of the Instrument
Operator should not remove any cases or panel for any reasons. If you touch inside the
instrument it could result personal shock or fire hazard. Refrain from spilling any liquid
on or inserting anything flammables or piece of metal into the ventilation of the instrument.
Such actions could cause fire, shock, malfunction and be an accident hazard while the
power is on.
instrument it could result personal shock or fire hazard. Refrain from spilling any liquid
on or inserting anything flammables or piece of metal into the ventilation of the instrument.
Such actions could cause fire, shock, malfunction and be an accident hazard while the
power is on.
■
Warnings on Power Line
●
Make sure to connect only to the rated power line voltage. Excess voltage may
cause fire.
Confirm the voltage of the commercial power line before connecting the AC power
cord. The power frequency of the power line should be 50/60 Hz.
cause fire.
Confirm the voltage of the commercial power line before connecting the AC power
cord. The power frequency of the power line should be 50/60 Hz.
●
Warning on the Power Cord
Use only the optional power cord that is attached to this instrument. The use of the
power cord other than that attached could cause fire hazard.
If the attached cord is damaged stop using it and contact your local Leader agent.
Should you use a damaged cord, it could cause a shock or create a fire hazard. When
you pull out the cord be sure to hold it by plug and pull from the socket not by holding
the cord wire.
power cord other than that attached could cause fire hazard.
If the attached cord is damaged stop using it and contact your local Leader agent.
Should you use a damaged cord, it could cause a shock or create a fire hazard. When
you pull out the cord be sure to hold it by plug and pull from the socket not by holding
the cord wire.
■
Warning on Fuse
When the fuse is melted the instrument stops operation. If the fuse melted, turn off the
power switch and disconnect the power plug from the socket. If you change the fuse
while the cord is connected to the socket, it could cause a shock hazard. Only use the
specified type and rated current and voltage fuses.
If the cause for melting fuse is unclear or if you suspect there is damage to the instrument
or if you have no proper fuse at hand please contact your local Leader agent.
power switch and disconnect the power plug from the socket. If you change the fuse
while the cord is connected to the socket, it could cause a shock hazard. Only use the
specified type and rated current and voltage fuses.
If the cause for melting fuse is unclear or if you suspect there is damage to the instrument
or if you have no proper fuse at hand please contact your local Leader agent.
II