Baldor GLC15 사용자 설명서

Operation  4‐1

MN2408

   EM0046A21 (MRS17)

Stop

Manual

Run

Display

Menu 
Group

LED Indicators

Operating Modes and

Horn & Fault Reset

Note: The operator control panel is equyipped with a heater element that allows the LCD display

to operate to -40

°C (not the entire generator set, see generator specifications).  This

heater operates from the main battery power.

Alarm (red) - Alarm (shutdown) condition occurred.  Annunciates & shuts down generator.
Not In Auto (red) - Control is not in auto mode and cannot provide standby power.
Running (green) - Generator is running, no alarms or warnings.
Warning (yellow) - A warning condition has occurred.  Annunciates only.
Ready/Auto (green) - Control is in Auto mode and ready to provide standby power.
Supplying Load (green) - Generator is providing output voltage to load.

High Coolant temperature

Low Oil pressure

Low Fuel level

Generator Under/Over Voltage

Generator Under/Over Frequency

Generator Over Current

Generator Overspeed

Coolant temperature Low

Starting battery Under/Over Voltage

Immediately begins the crank cycle to start engine and produce power (MAN mode only).

Start generator set operation (MAN mode only).

Stops the Engine and generator set (MAN mode only).

Displays setpoints, adjustments, Alarms and Warning conditions and Operating Mode selections.

Changes menu displayed - Measurement, Adjustment or History.

A and " 

Allows selection of OFF - MAN - AUTO mode choices.

Deactivates the Horn output.

Reset Alarms and Warnings.

Y and B 

Selects the menu choice, select the setpoint or select the menu or increase/decrease the
setpoint value.

Confirm and accept changed setpoint value.

Y and B Adjusts display contrast.

Enter+ Fault Reset Clears engine ECU faults.