Generac Power Systems 004701-0 사용자 설명서

  

35

❑  Generator is properly located.
❑  Generator is properly supported.
❑  Generator is properly restrained.

❑  Compartment construction is proper.
❑  Holes/Openings are vapor-sealed.
❑  Compartment size is correct.
❑  Compartment is vapor-sealed.
❑  Sound insulation is correct.
❑  Floor cutouts are properly completed.

❑   Airflow is adequate.
❑   Air inlet opening is correct.
❑   Compensate for restrictions.
❑   Check that installation has been tested.

❑   Fuel system is properly installed and checked 

for leaks.

❑   Pressure at regulator inlet is correct.
❑   Rated flow of primary regulator is correct.
❑   All parts are properly installed.
❑   Fuel system is properly tested/adjusted.

❑   Exhaust system complies with all applicable 

codes.

❑   Exhaust system is properly and safely installed.

‹

‹

‹

‹

‹

❑   Connections comply with local code requirements 

and all National Electrical Codes.

❑  Junction box is properly installed.
❑  Wiring meets all standards.
❑   All connections are correct.
❑   Conduit is properly installed and sealed.
❑  Generator is properly bonded to the vehicle.

❑  Recommended battery is installed.
❑  Recommended cables are installed.
❑  Cables are clean and tight.
❑  Cables are connected properly.
❑  Proper ventilation is provided.
❑   Terminals are coated with anti-corrosion grease, 

and terminal covers are positioned.

❑   Check that remote start/stop panels (if used) are  

installed properly.

❑   Check that hourmeter kit (if used) is installed 

properly.

❑   Check that any other options and accessories (if 

used) are installed properly.

❑  Check that all tests are completed properly.

‹

‹

‹

‹