Yamaha AN200 사용자 설명서

Chapter 6 Filter (VCF)

Wild, wild filter sweeps — VCF Types

The enormous power and versatility of the Filter section continues with the VCF Types. These hidden varia-
tions put some really heavy-duty sonic fireworks at your fingertips — just what you need to blow the crowd
away.

Try these settings out for size...

1 Call up a Pattern and press the Start/Stop button. Start out by setting

both [RESONANCE] and [FEG DEPTH] to around 1:00.

2 Simultaneously hold down [SHIFT] and turn the [CUTOFF] knob.

Keep your eyes on the display as you do this — the setting will change! For starters, select “12db” —
which should be around 11:00.

In this shifted condition, the [CUTOFF] knob becomes the VCF Type selector. (That’s why “TYPE” is
printed in black below the knob.)

3 Now, take your finger from the [SHIFT] button, and the knob reverts to its

original identity as the Cutoff control.

Turn it very slowly — especially between 8:00 and 1:00 — as you listen to the gradual changes in the
sound.

4 Not wild enough for you? Let’s move onto another type then...

Hold down [SHIFT] again and turn the [CUTOFF] knob to around 12:00, so that “bPF” is called up in the
display.

Is that any wilder? Still too tame? Let go of [SHIFT] and try tweaking the [CUTOFF] knob between 8:00
and 2:00.

5 Let’s try one more. Hold [SHIFT] and set the [CUTOFF] knob to around

2:00, so that the “HPF” type is selected.

Things can get kind of crazy here, too. Tweak the [CUTOFF] knob some more — especially between
12:00 and 3:00 — and hear what kind of madness you can generate.

Don’t forget the [RESONANCE] and [FEG DEPTH] knobs! Work with them too as you tweak the
[CUTOFF] knob. There’s a lot of sonic variation to be had in just these three controls.