Yamaha AN200 사용자 설명서

Chapter 8  Pattern Playback

Try these bread-and-butter controls out, and change the mix of the Patterns.  Pan and Volume only affect the 
Synth track — the Rhythm tracks remain unchanged.

Hold down the [SHIFT] button, and turn the [PARAM] (PAN) knob.

Notice how the Synth track sound moves from left to right and back again 
as you turn the knob?  (We assume you’re listening to this with stereo 
headphones or on a stereo speaker system...)

Hold down the [SHIFT] button, and turn the [WET] (VOL) knob.

Hear how the Synth sound fades in and out as you tweak the knob?

Remember, this only affects the Synth track — unlike the master [VOLUME] 
knob, which controls the overall sound of the AN200.

Did you notice that you can add sounds, too?  This is especially effective in the Rhythm tracks.  
If the selected Rhythm track has some unlit buttons — meaning there are spaces in the track 
— try pressing some of those buttons to add more drum/percussion hits to the track.  Or try 
taking some of the lit buttons’ sounds out, and hear what kind of rhythm you come up with.

If you like the new Pattern you’ve created, store it.  (See page 79.)  All Step Mute settings are 
saved along with the stored Pattern; yet the original data is not changed.

Allows you to mute and unmute specific 
steps in a Pattern during playback.  Select 
and start a Pattern, then select the track you 
wish to control: Synth or Rhythm 1, 2, or 3.  
Then, press the desired buttons to mute/
unmute the steps.

Determines the position of the Synth track 
sound in the stereo image.  Hold down 
[SHIFT], and turn the [PARAM] (PAN) knob 
to adjust.

Range
L63 (full left) — Cntr (center) — 
r63 (full right)

Determines the volume of the Synth track.  
Hold down [SHIFT], and turn the [WET] 
(VOL) knob to adjust.

Range
0 — 127