American Audio Pro-Scratch 2 사용자 설명서

 - This is used to activate 

the sampler function. When this function is acti-
vated a created sample will play in a continuos 
loop mode.

  This buttons is 

used to select a track. Tapping this button will for-
ward skip to the next track, holding down this but-
ton will rapidly forward skip through the tracks.

 
12.  

  This buttons is 

used to select a track. Tapping this button will 
back skip on track, holding down this button will 
rapidly BACK SKIP through the tracks.

  This button activates the FX-MIX 

mode This mode will automatically stop a playing 
track or sample and restart from a selected cue 
point.

“CUE 

ON THE FLY” - This function allows you to set a 
CUE POINT (see CUE POINT page 16) without 
music interruption (“on the fly”). This button also 
sets the starting point of a seamless loop (see 
SEAMLESS LOOP).

 Pressing the CUE button during play-

back immediately pauses playback and returns 
the track to the last set cue point (see setting a 
CUE POINT, page 16). The red CUE LED will 
glow when the unit is in cue mode The LED will 
also flash every time a new CUE POINT is set. 
The CUE button can be held down to momentarily 
play the CD. When you release the CUE button it 
instantly returns to the CUE POINT. You can also 
tap the CUE button to create a BOP EFFECT (for 
definition of BOP EFFECT, see page 21).

This 

wheel has two functions.

The jog wheel will act as a frame search 

 

     control when the CD is in pause or cue 

 

     mode, allowing you to set a cue point. 
B. 

 The wheel also works as a pitch bend during 

      Playback.  Turning  the  wheel  clockwise  will  
     increase the pitch percentage up to 100%,
      and turning the wheel in the counter-clockwise 
     direction will decrease the pitch percentage 
     down to -100%. The pitch bend will be deter-
     mined on how long you turn the jog wheel

      continuously.
C. 

The jog wheel will act as a frame search 

 

     control when the CD is in pause or cue 

 

     mode, allowing you to set a cue point.

  Each press of the 

PLAY/PAUSE BUTTON causes the operation to 
change from play to pause or from pause to play. 
While in play mode the green play LED will glow, 
and while in pause mode the green play LED will 
flash.

  Pressing this will eject 

the CD. The eject function will only when the unit 
is in cue mode, this is to prevent accidentally 
ejecting the disc when in play mode.

This high quality LCD dis-

play indicates all the functions, as they are occur-
ring. This display is viewable at several comfort-
able angles (see page 8). The display ICONS will 
be explained in the section D.

  This button is 

used to activate and deactivate either the ECHO 
or FLANGER effect. See built-in effects on page 
28.

 This button is used to 

activate and deactivate either the TRANS or PAN 
effect. See built-in effects on page 29.

 The effects are locat-

ed on two different layers. This button allows you 
to select an effect on a different layer.

  SGL/CTN - This function allows you to 

choose between single track play or continuous 
track play (all tracks in order). This function also 
operates in PROGRAM and FLIP FLOP modes.

This button activates reverse 

play mode This function will play your track or 
sample in reverse. All pitch and effect functions 
will operate normally in this mode

  The TIME button will switch 

the time value described in the  TIME METER 
between ELAPSED PLAYING TIME, TRACK 
REMAINING TIME, and TOTAL REMAINING 
TIME.

  PITCH ON/OFF BUTTON - This button is 

©

American Audio

®

   -   www.americandj.com   -   Pro-Scratch 2™ Instruction Manual Page 10