Roland MC-909 사용자 설명서
37
Pattern Mode
Recording a pattern
1.
Use [VALUE] or [INC/DEC] to select the number of
the pattern you want to record.
2.
Press [REC].
fig.1-20
3.
Press [F1]–[F4] to select a recording method.
The corresponding recording standby screen will appear.
4.
Specify the time signature and length of the pattern,
and then record.
For details, refer to the section on each recording method.
The maximum number of notes per pattern is
approximately 30,000 notes
.
Realtime recording
This method lets you record your performance on the MC-909’s
velocity pads and D Beam controllers or an external MIDI keyboard.
Knob and slider movements can also be recorded.
velocity pads and D Beam controllers or an external MIDI keyboard.
Knob and slider movements can also be recorded.
Standby screen
fig.1-21
Function button
Recording method
[F1 (Realtime)]
Realtime Recording
Data from the velocity pads,
knobs, and external MIDI
devices will be recorded in
real time.
knobs, and external MIDI
devices will be recorded in
real time.
[F2 (TR-Rec)]
TR-REC
The sixteen velocity pads
represent notes, allowing
you to input note data by
switching each pad on or off.
represent notes, allowing
you to input note data by
switching each pad on or off.
[F3 (Step)]
Step Recording
Successively record each
note one after the other in a
non-realtime fashion.
note one after the other in a
non-realtime fashion.
[F4 (Tempo/Mute)]
Tempo/Mute Recording
Record tempo changes or
mute on/off events in real
time.
mute on/off events in real
time.
Parameter
Range
Explanation
Rec Beat
2/4–7/4, 5/8–
7/8, 9/8, 12/8,
9/16, 11/16,
13/16, 15/16,
17/16, 19/16
7/8, 9/8, 12/8,
9/16, 11/16,
13/16, 15/16,
17/16, 19/16
Pattern time signature
* Can be specified only for an
* Can be specified only for an
empty pattern.
Rec Measure
Length
Length
1–998
Pattern length
* An already-recorded pattern
* An already-recorded pattern
can be made longer, but not
shorter. To shorten it, use the
pattern edit Delete Measure
(p. 45) to delete one or more
measures.
shorter. To shorten it, use the
pattern edit Delete Measure
(p. 45) to delete one or more
measures.
Rec Mode
MIX,
REPLACE
REPLACE
Whether the recorded data will
be added to, or replace, the exist-
ing data
be added to, or replace, the exist-
ing data
MIX:
Newly recorded data
will be added to the previous-
ly-recorded data.
ly-recorded data.
REPLACE:
Previously-re-
corded data will be replaced
by the newly-recorded data.
by the newly-recorded data.
Rec Count In
OFF, 1 MEAS,
2 MEAS,
WAIT NOTE
2 MEAS,
WAIT NOTE
Length of the count before re-
cording begins
cording begins
If this is set to Wait Note, re-
cording will start when you
press a velocity pad or the
[PLAY] button.
cording will start when you
press a velocity pad or the
[PLAY] button.
Rec Loop Rest
OFF, ON
Insert a blank measure before
you return to the beginning of
the pattern
you return to the beginning of
the pattern
If this is ON, one blank mea-
sure will be inserted before
you turn to the first measure of
the pattern.
sure will be inserted before
you turn to the first measure of
the pattern.
* This provides a convenient
way to keep the end of the last
measure from being recorded
into the first measure.
measure from being recorded
into the first measure.
MC-909_Ref_e.book 37 ページ ２００５年３月１日 火曜日 午後３時２９分