Roland V-Synth 사용자 설명서

fig.00-02

fig.00-03

Press to turn the power on/off. 

→

 (Quick Start; p. 4)

Connect the included power cord to this inlet. 

→

 (Quick Start; p. 3)

fig.00-04

A PC card can be inserted here.

For details on installing the included PC card protector, refer to 
p. 178.

fig.00-05

This is a USB connector. You can connect it to your personal 
computer to send or receive files and MIDI messages.

(conforming to S/P DIF).

These connectors input/output a digital audio signal (stereo). The 
output signal is identical to the signal that is output from the MAIN 
OUT jacks.

S/P DIF is a digital interface format used for consumer digital 
audio devices.

fig.00-06

Adjusts the display contrast. 

→

 (Quick Start; p. 5)

fig.00-07

These connectors can be connected to other MIDI devices to receive 
and transmit MIDI messages.

fig.00-08

You can connect optional expression pedals (EV-5, etc.) to these 
jacks. By assigning a desired function to a pedal, you can use it to 
select or modify sound or perform various other control. 

→

An optional pedal switch (DP series) can be connected to this jack for 
use as a hold pedal. 

→

 (Quick Start; p. 18)

fig.00-09

An external audio source such as a CD player can be connected to 
these jacks for sampling or external input.

This selects the input gain of the INPUT jacks.

Set this to the “MIC” position if connecting a mic, or to the “LINE” 
position if connecting any other type of device.

fig.00-10

This jack is a stereo output of the sound unprocessed by onboard 
effects. An external effects processor or other devices can be 
connected to these jacks.

These jacks output the audio signal to the connected mixer/amplifier 
system in stereo. For mono output, use the L jack. 

→

 (Quick Start; p. 3)

This is the jack for connecting headphones (sold separately). 

→

 (Quick Start; p. 3)