Roland XV-3080 사용자 설명서

In the XV-3080’s Performance mode, you can play and 
control up to 16 instrument sounds at the same time, 
including Patches and/or Rhythm Sets. Such a set of sounds, 
as well as an effect setup, can be saved as a “Performance.” 
Each Performance is comprised of 16 “Parts,” each of which 
controls one of its sounds. Because the XV-3080 sound 
generator can play multiple sounds at the same time, it’s 
called a “multitimbral sound generator.”

fig.5-01.e

There are three basic ways to use Performances.

Refer to “QUICK START” (p. 23).

Refer to “QUICK START” (p. 27).

In Performance mode, you can use the XV-3080 as a 16-part 
multitimbral sound generator. Let’s try selecting some Parts 
and sounds, and then play the multiple Parts together as a 
Performance.

The basic steps for doing this include:

• Choosing the Parts to Play (p. 102)

• Selecting A Patches to the Parts (p. 104) 

• setting the Parts’ MIDI reception channels (p. 106).

After you have completed setting up your Performance, try 
playing a sequence from your computer or sequencer using 
the Performance’s sounds.

Turn on each Part you wish to use.

1. Select the Performance you wish to use.

2. Press [RX] to make the indicator light.

3. Use PART SELECT [1/9]–[8/16] to switch each Part on – 

so that its indicator lights – or off so that its indicator 
goes dark.

To turn Parts 9–16 on or off, press [1-8/9-16] to make the 
indicator light, and then press PART SELECT [1/9]–[8/16].

4. Press [RX] to make its indicator turn off.

Performance

Patch/

Rhythm set

Part 1

Part 9

Part 10

Part11

Part 16

Patch/

Rhythm set

Patch/

Rhythm set