Roland XV-3080 사용자 설명서
112
Chapter 6. Creating a Rhythm Set
Setting up Individual Rhythm
Tones
Tones
The parameters which can be set for each Rhythm Tone of
the Rhythm Set are assigned to the function select buttons as
follows.
the Rhythm Set are assigned to the function select buttons as
follows.
[CONTROL]
[WAVE]
Modifying a Rhythm Tone’s Waveform and Panning (p. 113)
[PITCH]
Modifying a Rhythm Tone’s Pitch (p. 115)
[TVF]
[TVA]
Editing Procedure:
1. Select the Rhythm Set you wish to set.
2. Press the function select button for the parameter you
want to set.
3. Use [
]/[
] to select the page containing the
parameter you want to set.
4. Use [E]–[H] to select the percussion instrument sound
you wish to edit according to the key that plays it.
[E]:
Selects the key one octave below the currently selected
key.
key.
[F];
Selects the key a semitone below the currently selected
key.
key.
[G]:
Selects the key a semitone above the currently selected
key.
key.
[H]:
Selects the key one octave above the currently selected
key.
key.
* You can also press a key on a connected MIDI keyboard to
5. Use [
]/[
] to move the cursor to the parameter
you want to set.
6. Turn the VALUE dial or by press [INC]/[DEC], to select
the desired value.
7. Press [EXIT] to return to the RHYTHM PLAY page.
Palette Function
When editing a Rhythm Tone, you can simultaneously view
the settings of all four of its Tones by pressing [PALETTE].
the settings of all four of its Tones by pressing [PALETTE].
1. When editing a Tone, press [PALETTE] to make its
indicator light.
The Palette page appears.
fig.6-03a
2. Press [
] / [
] to choose the Tone you wish to
modify.
3. Turn the VALUE dial or press [INC] / [DEC] to raise or
lower the parameter’s current value to the desired
setting.
setting.
* If you make a mistake when selecting a parameter value, or if
you do not like a change you have made, press [UNDO] to
restore the parameter to its original value.
restore the parameter to its original value.
4. If you wish to edit other parameters, press [
] / [
]
to select the desired parameter.
5. Repeat Steps 2–4 to adjust the parameter’s value.
6. To leave the Palette page, press [PALETTE] to turn off its
indicator.
7. Press [EXIT] to return to the RHYTHM PLAY page.
Tips for Selecting Rhythm Tone
Waveforms
Waveforms
Because the XV-3080 is designed to create completely
realistic sounds, the editing process depends heavily on the
complex PCM waveforms upon which Tones are based.
Therefore, if you try to create a sound that is totally different
from the waveform(s) you’re working with, the desired
result may be difficult or impossible to achieve.
realistic sounds, the editing process depends heavily on the
complex PCM waveforms upon which Tones are based.
Therefore, if you try to create a sound that is totally different
from the waveform(s) you’re working with, the desired
result may be difficult or impossible to achieve.
The XV-3080’s internal waveforms fall into the following two
groups.
groups.
One-shot:
These waveforms contain sounds that have short
decays. A one-shot waveform records the initial rise and fall
of its sound. Some of the XV-3080’s one-shot waveforms are
sounds that are complete in themselves, such as percussive
instrument sounds. The XV-3080 also contains many other
one-shot waveforms that are elements of other sounds. These
include attack components such as piano-hammer sounds
and guitar fret noises.
of its sound. Some of the XV-3080’s one-shot waveforms are
sounds that are complete in themselves, such as percussive
instrument sounds. The XV-3080 also contains many other
one-shot waveforms that are elements of other sounds. These
include attack components such as piano-hammer sounds
and guitar fret noises.
Looped:
These waveforms include sounds with long decays
as well as sustained sounds. With looped waveforms, the
latter part of the sound plays over and over for as long as the
latter part of the sound plays over and over for as long as the