Roland XV-3080 사용자 설명서

The XV-3080 produces sound in response to MIDI messages 
that it receives from an external MIDI device such as a MIDI 
keyboard or sequencer. In order for this to occur, the MIDI 
transmission channels of the external device must match the 
MIDI reception channels of the XV-3080.

In order to play single Patches, set the XV-3080’s MIDI 
reception channel as follows.

1. Press [SYSTEM] to make its indicator light.

2. Press the [MIDI] function select button.

3. Press [

] or [

] to move the cursor to the number 

underneath Patch/Rhy Rx Ch.

4. Use the VALUE dial or [INC]/[DEC] to select the desired 

MIDI channel.

5. Press [EXIT].

In order to play any of the 16 Parts in a Performance, you 
must set the MIDI reception channel for the Part.

1. Select the Performance. 

2. Press the [MIDI] function select button.

3. Press one of the [1/9]–[8/16] buttons to select the Part 

you want to set up. To select Part 9–16, press PART 
SELECT [1-8/9-16] to light its indicator, and then press 
the desired [1/9]–[8/16] button.

The button’s indicator will light, and the selected Part 
number will appear at the left in the display.

fig.1-5.e

4. Press [

]/[

] to move the cursor to “Channel.”

5. Use the VALUE dial or [INC]/[DEC] to select the desired 

MIDI reception channel.

6. Press [EXIT].

In addition to Patch mode, the XV-3080 also features three 
other modes: Performance mode, Rhythm Set mode, and 
GM2 mode.

You can easily select any of these modes by pressing the 
corresponding 

 button: PERFORM, PATCH, 

RHYTHM or GM.

fig.1-7.e

In Performance mode, the XV-3080 functions as a 
multitimbral sound module when used with an external 
MIDI controller. An entire multitimbral setup is called a 
“Performance.” Performances can be customized as needed, 
including their effects. Each of the sounds used in a 
Performance is assigned to one of the Performance’s 16 Parts.

In Patch mode, the entire XV-3080 is dedicated to the playing 
of a single Patch when controlled by an external MIDI device. 
You can also modify Patch settings in this mode, as well as 
their effects.

In Rhythm Set mode, the entire XV-3080 is dedicated to the 
playing of a single Rhythm Set when controlled by an 
external MIDI device. You can also modify Rhythm Sets in 
this mode, as well as their effects. XV-3080 Rhythm Sets can 
also be used for any Part in a Performance when in 
Performance mode.

In this mode, the XV-3080 functions as a General MIDI 2-
compatible sound generator.

General MIDI is a set of recommendations which seeks to 
provide a way to go beyond the limitations of proprietary 
designs, and standardize the MIDI capabilities of sound 
generating devices. Sound generating devices and music files 
that meet the General MIDI standard bear the General MIDI 

logo (

). Music files bearing the General MIDI logo can be 

played back using any General MIDI sound generating unit