Roland XV-3080 사용자 설명서

You can apply Multi-Effects, Chorus or Reverb to each of a 
Rhythm Set’s Tones. You can control the amount of effect to 
be applied to each Tone by adjusting its send level to the 
Multi-Effects, Chorus and Reverb.

1. Select the Rhythm Set you wish to work with.

2. Press [EFFECTS] to make its indicator light.

3. Press [

] / [

] to select the page you wish to display.

4. Press [

] / [

] to move the cursor to the 

parameter that you wish to adjust.

5. Turn the VALUE dial or press [INC] / [DEC] to select the 

desired value.

6. Repeat Steps 3 to 5 to set the Effect.

7. Press [EXIT] to return to the RHYTHM PLAY page.

A “*” symbol will appear at the left of the Rhythm Set name, 
indicating that its settings have been modified.

fig.2-02.e

These parameters set the output destination and level for the 
currently selected Rhythm Set Tone, and allow you to set its 
send levels to the Chorus and Reverb.

 This sends the Tone into the Multi-Effects. Its output 

destination is determined by to the Multi-Effects output 
settings.

 This sends the tone directly to one of the 

OUTPUT jack pairs, A–C.

 This sends the Tone directly to one of the 

INDIVIDUAL 1–6 jacks.

This sets how much of the Tone is sent to the Chorus.

This sets how much of the Tone is sent to the Reverb.

This page allows you to establish various settings for the 
Multi-Effects unit, including its parameters and output-jack 
assignment.

Use this parameter to select from among the 63 available 
Multi-Effects. For a description of these effects, check out 
“Parameters for Each Multi-Effect (MFX TYPE)” (p. 36).

These parameters allow you to customize the selected Multi-
Effect. For a description of the parameters, check out 
“Parameters for Each Multi-Effect (MFX TYPE)” (p. 36).

Select the Control Source to be used for changing the Multi-
Effects parameters, and set the Sens and parameters to be 
changed by that Control Source.