Roland VS-880EX 사용자 설명서
Loading Songs From CD-RW Discs
1. Select the disk (internal IDE hard disk) containing
the song you want to load as the current drive.
2. Place the CD-R disc to which the song data has
been backed up in the CD-RW drive.
3. Press [SONG] several times until “CD-R Recover
?” appears in the display.
4. Press [YES].
“STORE Current?” (Store the current song?) appears
in the display.
“STORE Current?” (Store the current song?) appears
in the display.
5. If you wish to save the current song, press [YES];
if not, then press [NO].
If you have selected a
demo song, then press [NO]
.
“CDR Rcv=” appears in the display.
6. Use the TIME/VALUE dial to select the song
(only one song or all songs on the CD-RW disc)
that you wish to load. To recover all songs from
the current drive, select “All.”
that you wish to load. To recover all songs from
the current drive, select “All.”
7. Press [YES].
8. If you selected “All” in step 6, the display will
indicate “INIT ***:* OK ?” (OK to initialize the
disk drive?). “***:*” is the ID number and parti-
tion number of the recover destination disk drive.
For example when recovering to partition 0 of the
internal hard disk drive, the display would indi-
cate “IDE:0.”
disk drive?). “***:*” is the ID number and parti-
tion number of the recover destination disk drive.
For example when recovering to partition 0 of the
internal hard disk drive, the display would indi-
cate “IDE:0.”
9. If you wish to initialize the current drive and then
recover, press [YES]. If at this point you press
[YES], all songs saved on the internal hard disk
will be lost. If you decide not to initialize, press
[NO]. Normally you should press [NO].
[YES], all songs saved on the internal hard disk
will be lost. If you decide not to initialize, press
[NO]. Normally you should press [NO].
10. Execute the load. When over multiple discs, the
disc is ejected, “Insert Disc #” (# indicates the
number in the order of insertion) appears in the
display. Insert the next disc and press [YES].
number in the order of insertion) appears in the
display. Insert the next disc and press [YES].
11. When the CD-R recover procedure is finished,
return to Play condition.
How to Erase the Data in the CD-RW
Disc
Disc
It is impossible to write audio data to the CD-R discs
in which the song data is saved. To write audio data to
the finalized CD-RW discs, erase the existing data as
follows.
in which the song data is saved. To write audio data to
the finalized CD-RW discs, erase the existing data as
follows.
1. Place the CD-RW disc which includes the data
you wish to erase in the CD-RW drive.
2. Press [SONG] several times until “CD-R Backup?”
appears in the display.
3. Press [YES] and “STORE Current?” appears.
4. Press [YES] to save the current song, or [NO] if
not. If the current song is the demo song, press
[NO]. “CDR Bak=” appears in the display.
[NO]. “CDR Bak=” appears in the display.
5. Press [YES] and “Finalized CD!” or “Not Blank
CD!” appears.
6. Press [ENTER (Yes)] and “CD-RW Erase?”
appears.
7. Press [YES] and “CD-RW Erasing...” appears and
the contents in the CD-RW disc is erased.
8.
“Continue?” appears and press [NO].
CONDITION MARKER#
MASTER
INPUT TRACK
AUX
TIME
48
24
4
0
dB
12
Song Number
Song Name
Sample Rate
Recording Mode
CONDITION MARKER#
MASTER
INPUT TRACK
AUX
TIME
48
24
4
0
dB
12
Total number of songs backed up to CD-R (3 songs)
Chapter 8 Use with a CD-RW Drive
115
Chapter 8