Furuno FI-506 사용자 설명서

5. INSTALLATION

Fix the transducer to the mounting mast so that its mounting base is par-
allel with the water line. Also, position the transducer so its leading edge 
faces the bow.

1. Orient the mounting base as shown in the figure below, with the 

threaded part of the mounting base facing the bow. Fix the mounting 
base to the mast with four self-tapping screws (supplied).

2. Pass the connector on the transducer through the hole in the mount-

ing base and then screw the cap on the transducer into the mounting 
base.

BOW

Self-tapping Screw
(4x20, 4 pcs.)

(TOP VIEW)

5

50

40 

±

0.5

7.5

80

55 

±

0.5