Furuno FI-506 사용자 설명서
SAFETY INSTRUCTIONS
ii
WARNING
Indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
avoided, could result in death or serious injury.
CAUTION
Indicates a potentially hazardous situation which, if not
avoided, may result in minor or moderate injury.
avoided, may result in minor or moderate injury.
Warning, Caution
Mandatory Action
Prohibitive Action
SAFETY INSTRUCTIONS
The operator of this equipment must read these safety instructions before attempting to
operate the equipment.
operate the equipment.
WARNING
Do not open the equipment.
Only qualified personnel should
work inside the equipment.
work inside the equipment.
Do not disassemble or modify
the equipment.
the equipment.
Fire or electrical shock can result if
the equipment is modified.
the equipment is modified.
Do not operate the equipment
with wet hands.
with wet hands.
Electrical shock can result.
Safety instructions for the operator
Make sure no rain or water
splash leaks into the equipment.
splash leaks into the equipment.
Fire or electrical shock can result
if water leaks into the equipment.
if water leaks into the equipment.
Immediately turn off the power
at the switchboard if water leaks
into the equipment.
at the switchboard if water leaks
into the equipment.
Continued use of the equipment
can cause fire or electrical shock.
can cause fire or electrical shock.
Safety instructions for the installer
WARNING
Turn off the power at the switch-
board before beginning the
installation.
board before beginning the
installation.
Turn off the power to prevent
electrical shock.
electrical shock.
Make sure the installation site is
not subject to water spray.
not subject to water spray.
Fire or electrical shock can result if
water leaks into the equipment.
water leaks into the equipment.
CAUTION
Observe the following compass
safe distances to prevent interfer-
ence to the instruments:
safe distances to prevent interfer-
ence to the instruments:
Standard
compass
Steering
compass
0.35 m 0.30 m
FI-50 series
Instruments
Instruments
Warning Label
A warning label is attached to the equipment. Do not
remove the label. If the label is missing or damaged,
contact a FURUNO agent or dealer about replacement.
remove the label. If the label is missing or damaged,
contact a FURUNO agent or dealer about replacement.