Boss Audio Systems PS-6 사용자 설명서

Panel Descriptions

English

Deutsch

Français

Italiano

Español

Português

erl

try to turn the effect on, the battery is near depletion

and should be replaced. For instructions on changing

the battery, refer to “Changing the Battery” (p. 10).

* The CHECK indicator shows whether the effect is being

applied or not. It does not indicate whether the power

to the device is on or not.

3. OUTPUT Jacks A (MONO)/B

These output jacks can be connected to an amplifier

or another effects unit.

* Use the OUTPUT A jack when you want to use monaural

output.

* The output will differ depending on the settings for

the [MODE] knob and [SHIFT] knob. For details, refer to

“Description of Each Mode” (p. 6–p. 9).

4. INPUT Jack

This jack accepts signals coming from a guitar or

other musical instrument, or another effects unit.

* The INPUT jack doubles as the power switch. Power to

the unit is turned on when you plug into the INPUT jack;

the power is turned off when the cable is unplugged. To

prevent unnecessary battery consumption, be sure to

disconnect the plug from the INPUT jack when not using

the effects unit.

5. EXP Jack

Connect an expression pedal (Roland EV-5, BOSS

FV-500L/FV-500H; sold separately) here.
Depressing the pedal changes the amount of pitch

shift.
Pitch shifting is activated when you step on the

pedal. When you release your foot from the pedal

(minimum value) pitch changes become invalid.

* Set the Minimum Volume of the EV-5, FV-500L/FV-500H

to the minimum value (0).

* If not set to the minimum value, things won’t work

correctly.

6. Pedal Switch

Pressing this switch will turn the effect on/off.

7. Thumbscrew

When this screw is loosened, the pedal will open,

allowing you to change the battery.

* When operating on battery power only, the unit’s

indicator will become dim when battery power gets

too low.

Replace the battery as soon as possible. For the

procedure, refer to “Changing the Battery” (p. 10).