Roland AT-60S 사용자 설명서

®ÂØÒňÎ

®

 

AT-60S 

Atelier organ

 

 

 

TBS164   ©2002 Roland Corporation U.S., 5100 S. Eastern Ave., Los Angeles CA 90040    Faxback # 20197    Page  2 

Selecting One Touch Programs 

Use the following procedure to select automatic 
accompaniment settings: 

1.  Select a Music Style as described under 

“Selecting Music Styles.” 

2.  Press the ONE TOUCH PROGRAM button 

(located to the left of the upper keyboard.) 

3.  Touch a GROUP on the screen (e.g. Group 1, 

Group 2, Group 3, etc.) 

4.  Press a registration button [1]– [4] (i.e. the 

illuminated buttons between the upper and lower 
keyboards) to select panel settings. 

5.  Play a chord on the lower keyboard. 
6.  Press START/STOP to silence the organ. 
7.  Press the ONE TO UCH PROGRAM button to 

return to the previous panel settings. 

Refer to the Owner’s Manual, pp. 66–67 for more 
information. 

Playing a Song from Disk 

Use the following procedure to play a song from disk: 

1.  Insert a compatible music disk (i.e. SMF or 

Atelier format) into the drive. 

2.  Press the SONG button in the COMPOSER 

section (located to the left of the disk drive.) 

3.  Touch [

q] or [p] on the screen to select a song. 

4.  Touch [

u] on the screen to play the song. 

5.  Touch [

<] on the screen to silence the organ. 

Refer to the Owner’s Manual, pg. 131 for more 
information.

 

Recording a Song 

Use the following procedure to Record a Song using 
automatic accompaniment: 

1.  Select a Music Style as described under 

“Selecting Music Styles.” 

2.  Select an automatic accompaniment as 

described under “Selecting One Touch 
Programs.” 

3.  Make sure there is no disk in the drive. 
4.  Press the REC button in the COMPOSER 

section (located to the left of the disk drive.) 

5.  Play a note on the lower keyboard to start the 

automatic accompaniment and play a melody on 
the upper keyboard. 

6.  Touch STOP [

<] on the screen when you are 

done. 

7.  Touch RESET [

t] on the screen. 

8.  Touch PLAY [

u] on the screen to play the song.

 

Refer to the Owner’s Manual, pg. 132 for more 
information.

 

Saving a Recorded Song to Disk  

Use the following procedure to save a recorded song 
to disk: 

1.  Record a song as described under “Recording a 

Song.” 

2.  Insert a formatted disk in the drive. 
Note:  Make sure the disk was formatted on an AT-

3.  Touch REC/PLAY on the screen. 
4.  Touch UTILITY on the screen. 
5.  Touch SAVE/DELETE on the screen. 
6.  Touch [

q] or [p] on the screen to select a song 

destination. 

7.  Touch SAVE on the screen. 
8.  Touch ORIGINAL on the screen to save your 

song in Atelier format (or press SMF on the 
screen to save your song in SMF format.) 

9.  Touch EXIT on the screen to return to the main 

menu. 

Refer to the Owner’s Manual, pp. 139–140 for more 
information.