Roland XP-30 사용자 설명서

fig.1-09

The function buttons will act as Tone Switch buttons ([TONE 
SWITCH]) and Tone Select buttons ([TONE SELECT]).
[TONE SWITCH] allow you to turn each Tone in the Patch 
on (lit) or off (dark). When a Tone is turned on, it can be 
heard.
Use [TONE SELECT] to select the Tone you wish to modify. 
To select a Tone to modify, turn off [EDIT] indicator in the 
Tone setting display. To select two or more Tones 
simultaneously, hold down one of [TONE SELECT] and 
press the other [TONE SELECT]. In this case, the numbers of 
Tones other than the first-selected Tone will be displayed as * 
symbols.

fig.1-10

The function buttons (TONE SELECT section) will select the 
key shown in the display.
If the [EDIT] indicator is turned off in the Rhythm Set setting 
display (the setting display for individual keys), the function 
buttons will select the key to be edited.
[TONE SELECT 1]: move to an octave lower key
[TONE SELECT 2]: move to the semitone below
[TONE SELECT 3]: move to the semitone above
[TONE SELECT 4]: move to an octave higher key

Each mode contains a large number of settable items, and 
these items are organized into groups. When [EDIT] 
indicator is lit, the function buttons are used to select display 
groups. The displays that appear will depend on the current 
mode. The groups that can be selected in each mode are 
printed on the front panel above the buttons.

fig.1-11

■

The cursor buttons are used to move between display pages 
or to move the cursor.

fig.1-12

The various displays are grouped by function button, and 
each group contains several display pages. Use the cursor 
buttons to move between these display pages and groups.

An upward-pointing arrow ( ) shown in the display 
indicates that one or more pages exist before this page. A 
downward-pointing arrow ( ) shown in the display 
indicates that one or more pages exist after this page. Press 
[ ] to move to the previous page, or [ ] to move to the next 
page. Pressing [ ] while holding [SHIFT] will jump to the 
first page. Pressing [ ] while holding [SHIFT] will jump to 
the last page.

fig.1-13

From one of the Play displays, hold down [SHIFT] and press 
[

] to access the left-most function button group display.

In group displays that you select using the function buttons, 
you can hold down [SHIFT] and press [

] to move to the 

group of the function button to the left, or hold down 
[SHIFT] and press [

] to move to the group of the function 

button to the right.
Whenever you are in any group display, you can move to 
another group even if [EDIT] indicator is dark. In other 
words, this procedure allows you to move to a different 
group without having to turn on [EDIT] indicator, and is a 
faster and more efficient way to get around.