Roland C-200 사용자 설명서
44
Additional Convenient Functionality <Advanced Operation>
The C-200 has an Auto Power Off function that automatically switches off the instrument after approximately 240 minutes of
inactivity. The following procedure allows you to switch this function off.
inactivity. The following procedure allows you to switch this function off.
1.
Switch on the C-200 while holding down the [Function]
piston.
piston.
The C-200 activates function edit mode.
2.
Press the [8’ I] piston to disable the Auto Power Off
function.
function.
The [8’ I] piston lights steadily to indicate that the func-
tion has been switched off.
tion has been switched off.
3.
Press the [Function] piston to leave function edit mode.
To reset the Auto Power Off function to 240 minutes,
switch off the instruments and repeat this procedure,
this time pressing the [8’ II] piston in step (2).
switch off the instruments and repeat this procedure,
this time pressing the [8’ II] piston in step (2).
This setting is automatically saved to the Global area and
will be recalled whenever you switch on the C-200.
will be recalled whenever you switch on the C-200.
When you connect an optional expression pedal to the C-200 (see p. 39), you can use it to set the level of the MANUAL II
division (default). The following function allows you to assign the expression pedal to all organ sections (PEDAL, MANUAL I
and MANUAL II).
division (default). The following function allows you to assign the expression pedal to all organ sections (PEDAL, MANUAL I
and MANUAL II).
1.
Switch on the C-200 while holding down the [Function]
piston.
piston.
The C-200 activates function edit mode.
2.
Press the [Memory Piston] to assign the expression
pedal to the PEDAL, MANUAL I and MANUAL II
divisions.
The [Memory Piston] lights steadily to indicate that the
expression pedal now affects the sections mentioned
pedal to the PEDAL, MANUAL I and MANUAL II
divisions.
The [Memory Piston] lights steadily to indicate that the
expression pedal now affects the sections mentioned
above.
3.
Press the [Function] piston to leave function edit mode.
To assign the expression to the MANUAL II section only,
switch off the instruments and repeat this procedure,
this time pressing the [Celesta] piston in step (2).
switch off the instruments and repeat this procedure,
this time pressing the [Celesta] piston in step (2).
This setting is automatically saved to the Global area and
will be recalled whenever you switch on the C-200.
will be recalled whenever you switch on the C-200.
Auto Power Off function
Harpsichord piston
(lights steadily)
(lights steadily)
Auto Power Off
8’ I
Disabled
8” II (default)
240 minutes
Expression pedal assign function
Piston
(lights steadily)
(lights steadily)
Expression pedal
Celesta
MANUAL II
Memory Piston (default)
PEDAL/MANUAL I/
MANUAL II
MANUAL II
C-200_e.book Page 44 Monday, April 4, 2011 5:22 PM