Roland RG-1 사용자 설명서
27
Performance
You can adjust the damper noise of the acoustic piano sound (the sound of
the damper releasing the strings when you press the damper pedal).
the damper releasing the strings when you press the damper pedal).
1
Press the [Function] (Exit) button, getting its indicator to light.
2
Press the [Song] (Select -) button or [
] (Select +) button to
select “Damper Noise” in the RESONANCE screen.
fig.03-100d
3
Press the [
] (Value -) or [
] (Value +) button to change the
value.
4
Press the [Function] (Exit) button so the indicator goes out.
Adjusting the Sound Heard at String Release When the
Damper Pedal is Depressed (Damper Noise)
Damper Pedal is Depressed (Damper Noise)
Value
Description
Off, 1–10
Larger values produce correspondingly greater damper noise.
The Damper Noise function is not active when the value is set
to “Off.”
The Damper Noise function is not active when the value is set
to “Off.”
NOTE
• This setting is enabled
only with the piano tones.
You cannot set this for
other tones.
You cannot set this for
other tones.
• This setting is ignored
when Damper Resonance
is set to “Off.”
is set to “Off.”
RG-1_e.book 27 ページ ２００８年４月８日 火曜日 午後２時３６分