Roland RG-1 사용자 설명서

 

A confirmation message appears in the screen.

 

fig.06-160d

 

If you press the [Function] (Exit) button, none of the data 
in User memory, USB memory, or on the floppy disk is 
erased, and you’re returned to the previous screen.

 

The data in the User memory or USB memory or on the 
floppy disk is deleted.

 

Be sure not to turn off the power as long as 
“Executing...” is displayed.

This operation is referred to as “Factory Reset.”

 

When you perform a Factory Reset, all settings that have 
been stored in memory up to then are erased and reset to 
their factory defaults.

 

A confirmation message appears in the screen.

Pressing the [Function] (Exit) button at this point returns 
you to the previous screen without Factory Reset being 
executed.

 

Factory reset is executed.

When the factory reset is complete and the screen shown 
below appears, switch the power off, then back on.

 

Never switch off the power until this screen appears.

 

Contents of the User Memory

 

Contents of the USB memory connected to 
the External memory connector

 

Contents of the Floppy disk

RG-1_e.book 77 ページ ２００８年４月８日　火曜日　午後２時３６分