Roland RG-1 사용자 설명서

 

The following become possible once you connect a USB cable 
(available separately) between the USB (MIDI) connector on 
the RG-1’s jack panel and the USB connector of your 
computer.

• You can use the RG-1 to play sounds from SMF music 

files played back with MIDI software.

• By exchanging MIDI data with sequencer software, you 

can save songs recorded with the RG-1 to your 
computer, and enjoy a variety of musical control and 
editing features.

Connect the RG-1 to your computer as shown below.

 

Normally, you don’t need to install a driver in order to 
connect the RG-1 to your computer. However, if some 
problem occurs, or if the performance is poor, using the 
Roland original driver may solve the problem.

For details on downloading and installing the Roland 
original driver, refer to the Roland website.

Roland website: http://www.roland.com/

Specify the USB driver you want to use, and then install the 
driver. For details, refer to “Making the Settings for the USB 
Driver” (p. 74).

• To prevent malfunction and/or damage to speakers 

or other devices, always turn down the volume, and 
turn off the power on all devices before making any 
connections.

• Only MIDI data can be transmitted using USB.

• USB cables are not included. Consult your Roland 

dealer if you need to purchase.

• Turn on the power to the RG-1 before starting up 

MIDI applications on the computer. Do not turn the 
RG-1 on or off while any MIDI application is 
running.

RG-1_e.book 82 ページ ２００８年４月８日　火曜日　午後２時３６分