Roland AT800 사용자 설명서
20
Before You Start Playing
Attaching the Music Rest
1.
Insert the supplied screws for the music rest into the
screw holes located on the top of the instrument,
and lightly tighten them (two locations).
screw holes located on the top of the instrument,
and lightly tighten them (two locations).
2.
Put the music rest between the screws and the
ATELIER’s body.
ATELIER’s body.
3.
While supporting the music rest with one
hand, secure it in place by turning the screws.
hand, secure it in place by turning the screws.
When attaching the music rest, support it firmly with one
hand to make sure that you don’t drop it. Be careful, so
you don’t get your fingers pinched.
hand to make sure that you don’t drop it. Be careful, so
you don’t get your fingers pinched.
Do not apply excessive force to the installed music rest.
Be sure to use the supplied screws for attaching the music
rest.
rest.
Before moving the piano, be sure to remove the music rest to
prevent accidents.
prevent accidents.
Removing the Music Rest
1.
To remove the music rest, support it with one
hand while loosening the screws.
hand while loosening the screws.
2.
Remove the music rest.
After removing the music rest, don’t forget to retighten
the screws.
the screws.
Setting Up the Music Rest
Screw
Screw
NOTE
NOTE
NOTE
AT-800_e.book 20 ページ ２００８年１０月１５日 水曜日 午前９時３７分