Roland RM-700 사용자 설명서

 

Various Settings

 

The effect may not be applied correctly when you press a pedal 

if “EX1–4” is assigned to more than one pedal.

 

Using the “Bend Up” or “Bend Down” function during a split 

hand side of the keyboard.

The effect of smoothly raising or lowering the pitch of a played note 

is called the “bender effect.”

You can assign the bender function to a pedal, then apply the 

bender effect by depressing and releasing the pedal.

You can also make a setting that determines how much the pitch of 

the note changes when you apply the bender. The maximum range 

of change in pitch is called the “bend range.”

 

Applies a damper pedal effect to the sounds in the 
left-hand side of the keyboard during a split 
performance (p. 39).

 

This raises the pitch of notes you play on the 
keyboard.

 

This lowers the pitch of notes you play on the 
keyboard.

 

Adjusts the overall volume.

 

Pressing the pedal during a layer performance will 
change the volume of the selected tone according to 
how deeply you press the pedal.
Pressing the pedal with “EX1” selected increases the 
layer Tone volume. The layer Tone is played at a fixed 
volume, regardless of how forcefully the keys are 
played.

 

Pressing the pedal with “EX2” selected increases the 
layer Tone volume, while the volume of the right-
hand Tone is decreased. 
The layer Tone is played at a fixed volume, regardless 
of how forcefully the keys are played.

 

Pressing the pedal with “EX3” selected increases the 
layer Tone volume. 

 

Pressing the pedal with “EX4” selected increases the 
layer Tone volume, while the volume of the right-
hand Tone is decreased.

 

The vocal effect will be turned on/off.

 

Switches the vocal effect type.
Pressing the pedal cycles you through the available 
types, like this: “Duet” 

 

→

 

 “Trio” 

 

→

 

 “Quartet” 

 

→

 

 “Duet” 

 

→

 

 ...

* You cannot use pedal operations to select types 

other than these.

 

When the Anime effect is on, the movement of the 
graphics or text in the screen will change.

 

This is a variation of Anime Control 1.

 

When Anime effect is on, the color of the graphics or 
text shown in the screen will change.

 

When you’re varying the Anime effect by using an 
Anime control 1–3 assigned to a pedal, you can switch 
the type of change by pressing a pedal that’s assigned 
to Anime Ctrl Mode.

 

Using the Pedal to Apply the Bender Effect 
(Bend Range)

RM-700_e.book 180 ページ ２００９年３月１８日　水曜日　午前１１時５分