Roland RM-700 사용자 설명서

 

Various Settings

 

* The Menu screen for Settings contains five screen pages. 

Touch 

 to switch between the pages.

 

The “USB” screen appears.

 

If you touch <Reset>, the currently selected setting 

(parameter) will return to its factory setting.

 

Normally, you don’t need to install a driver in order to connect the 

RM-700 to your computer via the USB connector. 

However, if some problem occurs, or if the performance is poor, 

using the original Roland driver may solve the problem. 

If you do so, make the following setting to specify the USB driver 

you intend to use before you install the driver.

In some cases, when USB memory is connected to the External 

Memory connector, it may take longer for data to be loaded, or data 

may fail to be loaded successfully. 

If this happens, changing the communication settings for the USB 

memory may help.

* Changing the settings is normally not required.

In some cases, when CD drive is connected to the Ext Drive 

connector, it may take longer for data to be loaded, or data may fail 

to be loaded successfully. 

If this happens, changing the communication settings for the CD 

drive may help.

* Changing the settings is normally not required.

 

USB Settings

 

Changing the USB Driver Settings 
(USB Driver)

 

Choose this if you want to use the standard USB driver 
that was included with your computer. 
Normally, you should use this mode.

 

Choose this if you want to use a USB driver 
downloaded from the Roland website.

 

Changing the Communication Settings for 
USB Memory (Ext. Memory Mode)

 

Changing the Communication Settings for 
External Drive (Ext. Drive Mode)

RM-700_e.book 186 ページ ２００９年３月１８日　水曜日　午前１１時５分