Roland RM-700 사용자 설명서

 

Effects List

 

This is a four-band stereo equalizer (low, high).

 

This is a stereo spectrum.

 

Adds sparkle and tightness to the sound.

 

Adds a special effect to the sound by cutting the volume 
in varying ranges.

 

Boosts the volume of the lower range, creating powerful 
lows.

 

This is a low-cut filter. It cuts the low-frequency 
component.

 

Creates a soft distortion similar to that produced by 
vacuum tube amplifiers.

 

Produces a more intense distortion than Overdrive.

 

This is an overdrive that provides heavy distortion.

 

This is a distortion effect that provides heavy distortion.

 

Simulates the speaker type and mic settings used to 
record the speaker sound.

 

This is an effect that simulates the sound of a guitar 
amplifier.

 

A phase-shifted sound is added to the original sound and 
modulated.

 

Extremely high settings of the phase difference produce a 
deep phaser effect.

 

A phaser that continues raising/lowering the frequency at 
which the sound is modulated.

 

It produces a metallic resonance that rises and falls like a 
jet airplane taking off or landing.

 

This applies a 3D effect to the flanger sound.

 

A flanger that lets you apply an effect independently to 
the low-frequency and high-frequency ranges.

 

Cyclically controls a filter to create cyclic change in timbre.

 

Adds a vowel character to the sound, making it similar to 
a human voice.

 

This is an effect that applies amplitude modulation (AM) to 
the input signal, producing bell-like sounds.

 

Cyclically modulates the volume to add tremolo effect to 
the sound.

 

Cyclically modulates the stereo location of the sound.

 

By applying successive cuts to the sound, this effect turns 
a conventional sound into a sound that appears to be 
played as a backing phrase.

 

Flattens out high levels and boosts low levels, smoothing 
out fluctuations in volume.

 

Compresses signals that exceed a specified volume level, 
preventing distortion from occurring.

 

This is a stereo chorus.

 

Uses a six-phase chorus (six layers of chorused sound) to 
give richness and spatial spread to the sound.

 

This is a chorus effect with added Tremolo (cyclic 
modulation of volume).

 

Produces a transparent chorus effect.

 

This applies a 3D effect to the chorus sound.

 

A chorus effect that lets you apply an effect independently 
to the low-frequency and high-frequency ranges.

 

The Rotary effect simulates the sound of the rotary 
speakers often used with the electric organs of the past.

 

This type provides modified response for the rotary 
speaker, with the low end boosted further.

 

It comprises vibrato/chorus, overdrive, and rotary effects.

 

This is a stereo delay. The delay time is set to a length of 
one eighth note.

 

This is a stereo delay. The delay time is set to a length of 
one quarter-note triplet.

 

This is a stereo delay. The delay time is set to a length of 
one dotted eighth note.

 

This is a stereo delay. The delay time is set to a length of 
one quarter note.

 

This is a stereo delay. The delay time is set to a length of 
one half note.

 

This is a monaural delay.

 

Adds modulation to the delayed sound.

 

Produces three delay sounds; center, left and right.

 

This applies a 3D effect to the delay sound.

 

A virtual tape echo that produces a realistic tape delay 
sound.

 

This is a reverse delay that adds a reversed and delayed 
sound to the input sound.

 

This is an effect that intentionally degrades the sound 
quality for creative purposes.

 

This applies a telephone sound.

 

This is a special type of reverb in which the reverberant 
sound is cut off before its natural length.

 

This effect connects an overdrive and a chorus in series.

 

This effect connects an overdrive and a flanger in series.

 

This effect connects an overdrive and a delay in series.

 

This effect connects an distortion and a chorus in series.

 

This effect connects an distortion and a flanger in series.

 

This effect connects an distortion and a delay in series.

 

This effect connects an enhancer and a chorus in series.

 

This effect connects an enhancer and a flanger in series.

 

This effect connects an enhancer and a delay in series.

 

This effect connects a chorus and a delay in series.

 

This effect connects a flanger and a delay in series.

 

This effect connects a chorus and a flanger in series.

 

On an acoustic piano, holding down the damper pedal 
allows other strings to resonate in sympathy with the 
notes you play, creating rich and spacious resonances. 
This effect simulates these damper resonances.

RM-700_e.book 217 ページ ２００９年３月１８日　水曜日　午前１１時５分