Roland MP-500 사용자 설명서

다운로드
페이지 44
 
36
 
Connecting to Audio Equipment
 
When you connect the MP-500 to audio equipment, you can 
play the sounds from the MP-500 through the speakers on 
the audio equipment or record your performances on a tape 
recorder or other recording device.
 
 
Connectors
 
fig.09-10
 
Output Jacks
 
You can connect audio equipment using audio cables (sold 
separately) and play the sounds from the MP-500 through 
the speakers on the connected equipment or record your 
performances on a tape recorder or other recording device. 
If the output of the connected device is monaural, you must 
use the L (Mono) jack.
 
Input Jacks
 
You can connect another sound source, such as audio 
equipment or an electronic instrument using audio cables 
(sold separately) and play the sounds from the connected 
device through the speakers on the MP-500.
If the output of the connected device is monaural, you must 
use the L (Mono) jack.
 
 
Making the Connections
 
* To prevent malfunction and/or damage to speakers or other 
devices, always turn down the volume, and turn off the power 
on all devices before making any connections.
* Always make sure to have the volume level turned down 
before switching on power. Even with the volume all the way 
down, you may still hear some sound when the power is 
switched on, but this is normal, and does not indicate a 
malfunction.
 
 
Playing Sounds from the MP-500 Through the 
Speakers on Audio Equipment or Recording 
Your Performances on a Recording Device
 
fig.59
 
1.
 
Turn the volume all the way down on the 
MP-500 and on the device you’re about to 
connect.
 
2.
 
Turn off the power to the MP-500 and other 
connected equipment.
 
3.
 
Use audio cables (sold separately) to make 
the connection.
 
4.
 
Turn on the power of the MP-500.
 
5.
 
Switch on the connected device.
 
6.
 
Adjust the volume level on the MP-500 and 
the connected device.
 
When Recording MP-500 Performances on a Recording 
Device
 
7.
 
Start recording with the connected device.
 
8.
 
Play the keyboard.
 
9.
 
When the performance ends, stop 
recording on the connected equipment.
 
 
Playing Audio Equipment Sounds Through the 
Speakers on the MP-500
 
fig.60
 
1.
 
Turn the volume all the way down on the 
MP-500 and on the device you’re about to 
connect.
 
2.
 
Turn off the power to the MP-500 and other 
connected equipment.
 
3.
 
Use audio cables (sold separately) to make 
the connection.
 
4.
 
Turn on the power to the connected 
equipment.
 
5.
 
Turn on the MP-500.
 
6.
 
Adjust the volume level on the MP-500 and 
the connected device.
 
 
Turning the Power Off After Use
 
After use, follow the steps below to switch off the power.
 
1.
 
Turn the volume all the way down on the 
MP-500 and on the device you’re about to 
connect.
 
2.
 
Turn off the power to the MP-500.
 
3.
 
Turn off the connected equipment.
Output
R
L(Mono)
Input
R
L(Mono)
Stereo
Stereo
MP-500
Input R/L
(Line In, Aux In)
In
Out
Pedal
MIDI
Output
R
L(Mono)
Input
R
L(Mono)
Stereo
Stereo
Output R/L
(Line Out, Aux Out)
MP-500
In
Out
Pedal
MIDI
Output
R
L(Mono)
Input
R
L(Mono)
Stereo
Stereo
MP-500.e.book 36 ページ 2003年6月11日 水曜日 午前9時46分