Roland RG-3 사용자 설명서
101
Chapter 7. Connecting External Devices
1.
Press the [Function] (Exit) button, getting its
indicator to light.
indicator to light.
2.
Press the [Song] (Select -) button or [
] (Select
+) button to display the MIDI screen.
fig.07-110d
3.
Press the [Song] (Select -) button or [
] (Select
+) button to get the value for “Local” (Local
Control) to flash.
Control) to flash.
fig.07-151d
4.
Press the [
] (Value -) button or [
] (Value
+) button to switch Local Control on or off.
5.
Press the [Function] (Exit) button so the indicator
goes out.
goes out.
■ Sending Tone Change Messages (Program
Change/Bank Select MSB/Bank Select LSB)
A Program Change is a message that means “change to the
Tone of the specified number.” The device that receives this
changes to the Tone of the corresponding number.
Tone of the specified number.” The device that receives this
changes to the Tone of the corresponding number.
When you choose a Program Change message (Program
Number), the Program Number will be transmitted to the
MIDI device connected to the RG-3.
Number), the Program Number will be transmitted to the
MIDI device connected to the RG-3.
The MIDI device that receives the Program Number changes
the tone to the corresponding Program Number.
the tone to the corresponding Program Number.
Normally, the Tone is selected from the 128 Tones available.
Some MIDI devices, however, have more than 128 Tones.
With such devices, the Tone is selected through a
combination of Program Change messages and Bank Select
messages. There are two parts of a Bank Select message: the
MSB (Controller 0, with a value of 0–127) and the LSB
(Controller 32, with a value of 0–127).
combination of Program Change messages and Bank Select
messages. There are two parts of a Bank Select message: the
MSB (Controller 0, with a value of 0–127) and the LSB
(Controller 32, with a value of 0–127).
* Some MIDI instruments can’t handle Bank Select messages.
Others can handle Bank Selects, but do not recognize the LSB
part.
part.
1.
Press the [Function] (Exit) button, getting its
indicator to light.
indicator to light.
2.
Press the [Song] (Select -) button or [
] (Select
+) button to display the MIDI screen.
fig.07-110d
3.
Press the [Song] (Select -) button or [
] (Select
+) button so that the value set for “PC,” “Bank
Select MSB,” or “Bank Select LSB” is flashing.
Select MSB,” or “Bank Select LSB” is flashing.
fig.07-170d
Ch:
Setting the MIDI Channel Used for
Transmitting Program Numbers When
Switching User Programs
Transmitting Program Numbers When
Switching User Programs
PC:
Program Number
Bank (Left):
Bank Select MSB
Bank (Right):
Bank Select LSB
Value
Description
On
Local Control is switched on.
Off
Local Control is switched off.
Bank Select MSB
Bank Select LSB