Roland RG-3 사용자 설명서
81
Chapter 5. User Program Registration
Calling Up Saved User Programs
You can easily call up User Programs.
1.
Press the [Function] (Exit) button so the indicator goes out.
2.
Hold down the [Function] (Exit) button and press the [
]
(Value -) button or [
] (Value +) button to select the User
Program you want to call up.
fig.05-070d
The display changes to indicate the registered buttons and other
performance settings. The tone name registered in the User Program
appears in the lower row of the screen.
performance settings. The tone name registered in the User Program
appears in the lower row of the screen.
Restoring the Standard Performance Settings
(Settings in Effect When the Power is Turned On)
(Settings in Effect When the Power is Turned On)
After you have called up User Programs, you can use the following
procedure to restore the performance settings that are selected when the
power is turned on.
procedure to restore the performance settings that are selected when the
power is turned on.
1.
Press the [Function] (Exit) button so the indicator goes out.
2.
Hold down the [Function] (Exit) button and press the [
]
(Value -) button to select “User Program 01.”
fig.05-070d
3.
While holding down the [Function] (Exit) button and the [
]
(Value -) button once again.
The following screen appears.
fig.05-090d
The favorite performance settings are cancelled, restoring the settings to
their status when the power is turned on.
their status when the power is turned on.
You can use the Pedal as a
dedicated switch for
selecting User Programs in
order.
dedicated switch for
selecting User Programs in
order.
For more details, refer to
“Using the Pedal to Switch
User Programs” (p. 88).
“Using the Pedal to Switch
User Programs” (p. 88).