Roland SD-50 사용자 설명서
![Roland](https://files.manualsbrain.com/attachments/0f4c16ad543d01443d705a6df0a922f055403287/common/fit/150/50/3f2e1fe174f8814c1395beda0db29618b95ef95d02ed697f721709eb4377/brand_logo.png)
57
Using the SD-50 as an Audio Interface
Adjust the input level
1.
Press the [PART] button a number of times to access the audio part screen.
The level meters will appear.
page_audio_meter-mic.eps
2.
Turn the [SENS] knob to adjust the input volume.
In order to record with the best audio quality, use the [SENS] knob to increase the level as far as possible without
allowing an overload to occur; i.e., don’t let the level meter reach the maximum point.
allowing an overload to occur; i.e., don’t let the level meter reach the maximum point.
You can apply echo to the sound of the connected microphone or guitar (p. 59).
* If the indication below appears, the input level has overloaded even though the level meter did not reach the
maximum point.
fig.input-level-over.eps
1.
Operate your computer to start recording.
For details on how to start recording, refer to the user’s guide for the software you’re using.
Recording
SD-50_e.book 57 ページ 2010年1月25日 月曜日 午前10時52分