Roland MT-90U 사용자 설명서
51
Other Functions
When playing Roland digital piano supported SMF data (see
“The MT-90U Allows You To Use the Following Music Files”
(p. 57)), the left-hand part and right-hand part are usually
assigned to tracks [3] and [4], respectively (p. 28). However,
the track assignments in the SMF data can sometimes differ.
If the track buttons don’t effectively control the left-hand and
right-hand parts when this is set to “Auto”, then change the
setting to “2/1 Part” or “3/4 Part.”
“The MT-90U Allows You To Use the Following Music Files”
(p. 57)), the left-hand part and right-hand part are usually
assigned to tracks [3] and [4], respectively (p. 28). However,
the track assignments in the SMF data can sometimes differ.
If the track buttons don’t effectively control the left-hand and
right-hand parts when this is set to “Auto”, then change the
setting to “2/1 Part” or “3/4 Part.”
1.
Press button [4] while pressing the
[
(Song)] button.
The function screen appears.
2.
Press the [
(Bwd)] or [
(Fwd)] button
until “Track Assign” appears.
The following screen appears.
<Fig27.eps>
3.
Press the [+] or [-] button to change the setting.
4.
Press the [
(Song)] button to return to the
basic screen.
After changing track parts, select the song again before
playing it.
playing it.
* Track assignment settings remain stored even while the
power is turned off. When you want to return to the factory
default settings, see “Returning to the Factory Default
Settings (Factory Reset)” (p. 53).
default settings, see “Returning to the Factory Default
Settings (Factory Reset)” (p. 53).
If the volume of an SMF and audio file do not match, use the
following procedure to adjust the audio file volume.
following procedure to adjust the audio file volume.
1.
Press button [4] while pressing the
[
(Song)] button.
2.
Press the
[
(Bwd)] or [
(Fwd)] button
until “Audio Volume” appears.
3.
Press the [+] or [-] button to change the setting.
4.
Press the [
(Song)] button to return to the
basic screen.
Assigning Parts to Track
Buttons (Track Assign)
Buttons (Track Assign)
Setting
Description
Auto
The MT-90U automatically specifies
parts to track buttons according to the
music file.
parts to track buttons according to the
music file.
2/1 Part
Assign part 1 to track [4], part 2 to
track [3], and part 3 to track [1].
track [3], and part 3 to track [1].
3/4 Part
Assign part 4 to track [4], part 3 to
track [3], and part 1 to track [1].
track [3], and part 1 to track [1].
Adjusting the Volume of
Audio Files
Audio Files
Setting
Description
0–127
Audio file volume
Raising the value increases the volume.
Raising the value increases the volume.
MT-90U_r_e1.book 51 ページ ２００８年３月２４日 月曜日 午後４時４６分