Siemens TC12 사용자 설명서

TC12 Installation, Commissioning & Maintenance Handbook

2.2.2 PC

The C

s not have a motherboard;

instead the processor card and the other
There are 2 types of TC12 PC which may be used and are described below:

2.2.2.1

the TC12 cabinet. It has a conventional keyboard attached to it and needs a
sep a

checking of its operation.

d has an integrated LCD

2.2.2

the PC manufacturer's set up instructions should be followed.

SAFETY NOTE!

When initialising the PC, check the working voltage range of the PC is

e mains supply that is going to be used. Follow the

ains supply.

2.2.2.4

2.2.2.4.1 Rack Mount Data Transmission PC

in it.

nused 6U positions are fitted with a 6U blanking panel

(561/4/20899/022)

T 12 PC is not like most PCs in that it doe

cards are plugged into a back plane.

Rack Mount PC

The Rack Mount PC is a convention desktop style of PC which sits on a shelf in

ar te monitor for software installation and any

2.2.2.2 Flat Panel PC

The Flat Panel PC may be used in situations where a compact TC12 Instation i
required. The PC is normally mounted in a 19” rack an
screen and membrane keyboard.

.3 TC12 PC Operating System

The TC12 PC software uses DOS as its operating system. The TC12 PC
normally comes with DOS pre-installed. If, however, if DOS is not installed then

suitable for th

anufacturer's instructions for any switches/links etc., which need to be
changed in order for the PC to work with the intended m

TC12 PC Configurations

The following combinations of TC12 PC may be used:

A rack mount PC which is to be used for data transmission would normally have
the following, additional, cards installed

• Ethernet Card (Etherlink 3) (not needed if processor card has built-in

Ethernet)

• Digi I/O Card
• Intelligent Modem Driver Card (IMD) either Xi or Xe (1 per ITU rack)

666/HE/43100/000

Page 13

Issue 9