Boss Audio Systems RC-300 사용자 설명서
Phrase Memory Settings
24
Parameter
Value
Explanation
Assign1 Src Mode
MOMENT
Specifying the Type of Operation (Source Mode)
If a momentary-type foot switch (such as the separately sold FS-5U) is connected as the source, you can specify how
foot switch operations will affect the value.
* If the [LOOP FX] pedal is set to MOMENT, it will no longer be possible to enter Pedal Function mode (p. 10) by
holding down the [LOOP FX] pedal for two seconds or longer.
MOMENT
The setting will normally be off (minimum value); it will be on (maximum value) only while
you continue holding down the foot switch.
TOGGLE
The setting will alternate between off (minimum value) and on (maximum value) each time
you press the foot switch.
Default assignments of functions controlled
The default assignments are as follows. If you simply connect pedals without making any settings, you can use them to control the following
parameters and functions.
Assign
Switch
Assign Source
Assign Target
Explanation
Assign1
ON
EXP1 PEDAL
EFFECT CONTROL
The effect that’s most suitable for the selected LOOP FX type will be
applied.
Assign2
ON
EXP2 PEDAL
Level
The pedal will control the volume of the phrase memory.
Assign3
ON
CTL1 PEDAL
MEMORY INC
The pedals will switch phrase memories.
Assign4
ON
CTL2 PEDAL
MEMORY DEC
Assign5
ON
CTL3 PEDAL
FX TYPE INC
The pedals will switch the LOOP FX type.
Assign6
ON
CTL4 PEDAL
FX TYPE DEC
Assign7
ON
SYNC START/STOP
ALL PLAY/STOP
All tracks can be simultaneously played/stopped upon reception of
ALL START/STOP messages from the master RC-300 unit (p. 39).
Assign8
OFF
POLARITY switch
When Connecting EV-5s
When Connecting FS-5Us
When Connecting FS-6s
Connecting to External Pedals
Connect your EXP pedals (EV-5
, etc.
; available separately) or foot switches (FS-5U, FS-6; available separately) as shown in the illustration.
The function of the external pedal (EXP pedal or foot switch) can be assigned independently for each phrase memory. For details, refer to “Assigning
Red
CTL 4
CTL 4
CTL 2
EXP 3
CTL 2
CTL 3
CTL 3
CTL 1
EXP 2
CTL 1
Red
White
White
Cable:
Stereo 1/4” phone
type fg
1/4” phone type x 2
MODE/POLARITY switch
Cable:
Stereo 1/4” phone
type fg
Stereo 1/4” phone type
* Use only the specified expression pedal (Roland
EV-5, etc. ; sold separately). By connecting
any other expression pedals, you risk causing
malfunction and/or damage to the unit.
* If you use a mono cable to connect a single FS-5U, the CTL 1, 2 jack will be CTL 1, and the CTL 3, 4 jack will be CTL 3.