Denon Dj DN-X400 사용자 설명서

8

If the separately sold DN-1800F, DN-2100F and DN-2600F players are connected to CH-1 or CH-2, they can be
started using the source input fader (Ch. fader) or Crossfader, as long as  the 3.5 mm stereo mini cords have
been connected.

Turn on the Ch. fader start 
switch.

Move the source input fader
(Ch. fader) of CH-1 or CH-2
control all the way to the
bottom.

DN-1800F
Set the cue point on either drive.
DN-2100F and DN-2600F
Set the A-1 or A-2 point on either drive.

When you want to start the
player, move up the source
input fader (Ch. fader) and
the CD player will begin
playing.

NOTES:
• Channels selected with the Crossfader Assign

A, B switches and the Crossfader Start A, B
buttons cannot be started with the source input
fader (Ch. fader).

• Ch. Fader Start and Cross Fader Start for the

same source will not operate simultaneously.
You must select from either one. If both Ch.
Fader and Cross Fader switches are ON, priority
will be the cross fader.

Using the Crossfader Assign A  B switches,
select the channel (CH-1 or CH-2) that the CD
player is connected.

Press the Crossfader Start A, B buttons  of
the channel connected to the CD player to be
controlled.

Slide the Crossfader all the way in direction
opposite the source you want to start. (In the
following example, startup is done with the
CD player connected to CH-1 set to  Assign
A. )

DN-1800F
Set the cue point on the left drive.
DN-2100F and DN-2600F
Set the A-1 or A-2 point on the left drive.

Use the Crossfader Contour control to control
the cross fader startup curve.

When the Crossfader is slid in the opposite
direction as in  “1”, CD player play will begin.

3.5 mm stereo
mini cord

CH1
Fader jack

CH2
Fader jack

CD1
Fader jack

CD2
Fader jack

3.5 mm stereo
mini cord