Roland TD-8KV 사용자 설명서

Before using the KD-80, you need to adjust the head tension 
(p. 6).

• Take care not to pinch your fingers between the KD-80 

pad and the stand plate.

• Please be aware that by using a felt beater, you risk 

causing damage to the head as a result of the metal 
portions of the beater that can become exposed when the 
felt wears thin. For the kick pedal, we recommend that 
you use only the supplied beater, or a commercially 
available plastic beater.

Place the KD-80 pad, with the head surface facing 

downward, on a flat surface such as the floor.

Use the included tuning key to loosen the bolts for 

the bracket on the back of the KD-80 pad, then 

open the bracket.

Mount the stay on the pad.

Align the mark on the stay with the protrusion of the 
bracket, and use the tuning key to firmly tighten the bolts 
that you loosened in step 2.

Loosen the leg nut.

Rotate the rubber foot to adjust the leg tip.

Adjust to use the spike legs when installing on carpeting 
or other soft surfaces, or the rubber legs when installing on 
flooring or other hard surfaces.
When shipped from the factory, the stand is adjusted for 
using the rubber legs.

• The tip of the spike is sharp. Handle it with care.
• When using on flooring, the spike legs may damage the 

floor. Adjust to use the rubber legs.

Tighten the nut and rubber foot to secure the 

rubber foot in place and keep it from loosening.

The nut and rubber foot must be tighten to prevent the 
malfunctions.

Tuning Bolt

Leg

T-bolt

Rubber
Foot

Head

Foot

Stand

Cushion

Sensor

Frame

Hoop

Bracket

Output Jack

Stay

Align the marks

Bolt

Spike

Rubber Foot

Nut