Vocopro DVG-909K 사용자 설명서
12
MICROPHONE CONNECTIONS
The DVG-909K has three individual microphone channels, each with their own Volume and HI/LOW EQ controls. Each
channel has both unbalanced 1/4” and balanced XLR mic inputs.
channel has both unbalanced 1/4” and balanced XLR mic inputs.
NOTE: For each channel you cannot be connected to both 1/4” and XLR inputs, you must be connected to one or the
other.
other.
Connect by 1/4” mic cable (Fig. A)
Connect the 1/4” end of the microphone cable into one of the UNBALANCED MIC INPUTS on the rear panel of the DVG-
909K. See figure A.
909K. See figure A.
Connect by XLR mic Cable (Fig. B)
Connect the XLR cable’s female end into one of the BALANCED MIC INPUTS on the back of the DVG-909K. See figure B
EXTERNAL CONTROLLER
(Fig. C)
The DVG-909K can be connected to an external controller that easily fits into a slant rack case for more convenient opera-
tion.
tion.
Using the cables that are included with the controller, connect the top connector on the controller to the top connector
(DISC TRAY A) on the DVG-909k and connect the bottom connector on the controller to the bottom connector (DISC TRAY
B) on the DVG-909K.
(DISC TRAY A) on the DVG-909k and connect the bottom connector on the controller to the bottom connector (DISC TRAY
B) on the DVG-909K.
Getting connected cont.
XLR Inputs
(Fig. A)
(Fig. B)
(Fig. C)
Mic/Controller
1/4” Inputs
External Controller