Bühler 45 Series 사용자 설명서

다운로드
페이지 36
                                           
        45 Series Rotary Tiller 
 
 - 10 -
 
 
EQUIPMENT MATCHING 
 
To insure the safe and reliable operation of the Tiller, it is necessary to use a tractor 
with the correct specifications.  Use the following list as a guide in selecting a tractor to 
use on the machine. 
 
1.   
Horsepower:  Use Table 1 as a guide in selecting the tractor horsepower 
appropriate for your width of machine.  Use only small Agricultural tractors on this 
machine. 
 
 
 
               Table 1   Horsepower vs. Wid th 
 
 Model   
   Width  
Horsepower 
 
 4560              60 inches 
       45 max. 
 
 
 
     (1.5m) 
 
4572 
 
    72 inches 
       45 max. 
 
 
 
     (1.8m) 
 
 
 
           
 
ALERT:   Do not exceed the recommended horsepower levels.  The use 
of horsepower will void the warranty. 
 
2.   
3 Point Hitch: 
The Tiller is equipped with a Category 1, 3 point hitch. Be sure the tractor 3 point 
hitch is in the Category 1 configuration.  A Category 1 Quick Hitch will fit on the 
Tiller. 
 
Install the lift arm blocks or shorten the stop chains to place the arms into the 
non-sway configuration.  Refer to the tractor manual for details. 
 
3.   
Load Sensing Hydraulics: 
Many newer tractors are equipped with "Load Sensing" hydraulics.  It is the 
responsibility of the operator to set the tractor hydraulic system to provide "float" 
on the 3 point hitch. 
 
The float feature will allow the machine to follow the ground contours during 
operation. 
 
4.   
PTO Shaft: 
The tractor must have a 1 3/8" 6 spline 540 RPM PTO shaft to fit the driveline 
shaft supplied with the machine.  Do not use shaft adapters or operate at any 
other speed. 
 
It is not recommended that a tractor with variable speed PTO's be used on the 
Tiller.  Operating at speeds faster than 540 RPM will overload the drivetrain and 
lead to early failures.  Attach the safety chains supplied with the PTO shaft, 
allowing sufficient slack for the Driveline during turns and operation.  Check 
booklet attached to the PTO for instructions.