Acu-Rite 1604 사용자 설명서

  

no bars

•  Relocate the display unit and/or the 3-in-1 sensor.  

The units must be within 330 ft (100 m) of each other.

•  Make sure both units are placed at least 3 feet (.9 m) 

away from electronics that may interfere with the wireless 

communication (such as TVs, microwaves, computers, etc). 

•  Use standard alkaline batteries (or lithium batteries in 

sensor when temperature is below -4ºF/-20ºC). Do not use 

heavy duty or rechargeable batteries. NOTE: It may take 

up to 20 minutes for display unit and sensor to synchronize 

after batteries are replaced.

•  Synchronize the units:

1.  Bring both the sensor and display unit indoors and 

remove at least one battery from each.

2. Make sure the A-B-C switch on both units match.
3. Reinstall the battery in the outdoor sensor. 
4. Reinstall battery into the display unit.
5.  Let the units sit within a couple feet of each other for 

about 20 minutes to gain a strong connection. 

Flashing of the outdoor temperature may be an indication of 

wireless interference:
•  Make sure the A-B-C switch in the battery compartments of 

both the display unit and sensor are switched to the same 

letter. You may choose A, B or C; but both units must match 

to sync up. Sometimes changing to a different channel can 

help.

•  Weather Forecast icon predicts conditions for the next 12 

to 24 hours, not current conditions.

•  Has Learning Mode icon disappeared from the display 

unit? Learning Mode must complete before forecast and 

pressure will be accurate.

•  Allow unit to run continuously for 33 days. Battery removal 

or resetting the display unit will restart Learning Mode. 

After 14 days, forecast should be fairly accurate, however 

Learning Mode calibrates for a total of 33 days.