Omega Engineering CN9400 사용자 설명서

Press and hold the ✱ button, then press ▲ to increase or ▼ to

decrease the value or select the next option.

Note:

Check the new option value before moving to 

another function or exiting program mode.

Press and hold ▼ to scroll through the functions until 

LEUL is

displayed. Release ▼ to display current level. Press and hold the ✱

button, then press ▲ to increase or ▼ to decrease the level.

Release buttons when required level is obtained.

Press and hold both ▲ and ▼ buttons for at least 3 seconds.

Control commences with any new instructions now 

entered in the memory.

Press ▲ ▼ together for 3 seconds for program entry or exit.

Press ▲ or ▼ to scroll through functions.

Press ✱ ▲ together or ✱ ▼ together to change levels or alter

options.

Note:    If in difficulty by becoming “lost” in program mode,

press ▲ and ▼ together for 3 seconds to return

to display mode, check the Menu Navigation

summary above and try again.

The facilities of the controller are selected from the multi-level menu

using the front panel mounted buttons. 

Each level within the multi-level menu offers different functions, see

In operating mode, the upper (green) display reads process

temperature (PV) and the lower (orange) display reads setpoint

temperature (SP).

When in program mode, settings of each function, shown in the

upper display, can be made by selecting an appropriate option

from the lower display.

Note:

The controller will auto-exit program mode after 

60 seconds of inactivity.

Press and hold both ▲ and ▼ buttons for at least 

3 seconds.

Release the buttons together and the controller will

now display the function and option (setting of that

function), e.g.

Press ▲ or ▼ button once to view the next function. 

Press and hold ▲ or ▼ buttons to scroll through functions. The

current option or function value is shown in the lower display.

TUNE

OFF