Poulan DRT875 사용자 설명서

engine_art_78

The throttle control has been preset at the factory and 

ad just ment should not be necessary.  If adjustment is 

necessary, proceed as follows:
•  With engine not running, move remote throttle control 

lever to “FAST” position.

• 

If throttle lever on engine touches high speed stop, no 

further adjustment is necessary.  If throttle lever does 

not touch high speed stop, continue with adjustment 

procedure.

•  Loosen cable clamp screw.
• 

Move throttle lever up until it touches high speed stop, 

and hold in this position.

•  Tighten cable clamp screw securely.

The carburetor has been preset at the factory and ad just ment 

should not be necessary.  However, engine per for mance 

can be affected by dif fer enc es in fuel, tem per a ture, al ti tude 

or load.  If the carburetor does need ad just ment, contact 

your nearest authorized service center/de part ment

IMPORTANT:  NEVER TAMPER WITH THE ENGINE GOVERNOR, 

WHICH IS FACTORY SET FOR PROPER ENGINE SPEED.  

OVER SPEED ING THE ENGINE ABOVE THE FACTORY HIGH 

SPEED SETTING CAN BE DANGEROUS.  IF YOU THINK THE 

ENGINE-GOVERNED HIGH SPEED NEEDS ADJUSTING, 

CONTACT YOUR NEAREST AUTHORIZED SERVICE CENTER/

DEPARTMENT, WHICH HAS THE PROPER EQUIP MENT AND 

EXPERIENCE TO MAKE ANY NEC ES SARY ADJUSTMENTS.