John Deere AC-G7510H 사용자 설명서
28
Operator’s Manual
Service
MAINTENANCE
PERIODIC MAINTENANCE CHART:
To ensure satisfactory operation over an extended
period of time, an engine requires normal maintenance
at regular intervals. The Periodic Maintenance Chart
below shows periodic inspection and maintenance items
and suitable intervals. The bullet mark designates that
the corresponding item should be performed at that
interval.
NOTE: Some adjustments require the use of special tools
or other equipment. An electronic tachometer will
facilitate setting idle and running speeds.
Daily Every
Every
Every
Before
25hrs. 100 hrs.
200 hrs.
Storage
Check fuel •
Check engine oil •
Check for loose or lost nuts and bolts •
Check for leaks •
Check cylinder and head fins for
dust and dirt •
Check battery electrolyte level •
Check fuel lines (replace if necessary) •
Clean air cleaner foam element (**) •
Tighten nuts and bolts (*) •
Change engine oil (*) •
Clean fuel filter •
Replace air cleaner paper element (**) •
Clean dust and dirt from
cylinder and cylinder head fins (**) •
Clean and regap spark plug
Check engine oil •
Check for loose or lost nuts and bolts •
Check for leaks •
Check cylinder and head fins for
dust and dirt •
Check battery electrolyte level •
Check fuel lines (replace if necessary) •
Clean air cleaner foam element (**) •
Tighten nuts and bolts (*) •
Change engine oil (*) •
Clean fuel filter •
Replace air cleaner paper element (**) •
Clean dust and dirt from
cylinder and cylinder head fins (**) •
Clean and regap spark plug
•
Add fuel stabilizer
•
Run unit dry
•
* Perform these operations after the first 5 hours of use, then at the recommended intervals.
** Service more frequently under dusty conditions.
NOTE: These items must be performed with the proper tools. See your John Deere Customer Service Representative
for service, unless you have the proper equipment and mechanical proficiency.