John Deere AC-G6010S 사용자 설명서

22  

Operator’s Manual

Engine will not start. 

Engine switch is off. 

Turn engine switch to the ON position.

 

Fuel Tank empty. 

Fill tank per instructions in this manual.

 

Fuel Valve is off. 

Turn Fuel Valve on. 

 

 

Inadequate engine oil. 

Check oil level. This engine is    

 

 

equipped with a low oil sensor. The  

 

 

engine cannot be started unless the oil  

 

 

level is above the prescribed lower  

   limit.

 

No spark at spark plug. 

Remove the spark plug cap. Clean any  

 

 

dirt from around the plug base, then  

 

 

remove the spark plug. Install the  

 

 

spark plug in the plug cap. Turn the  

 

 

engine switch on.

 

 

Grounding the electrode to any engine  

 

 

ground, pull the recoil starter to see if  

 

 

sparks jump across the gap. If there is  

 

 

no spark, replace the plug.

 

 

Reinstall the plug and start engine  

 

 

according to instructions in this    

   manual.

 

 

Consult John Deere Customer    

   Service.

Generator has no output. 

Circuit breakers tripped. 

Reset circuit breakers.

 

Inadequate cord sets or  

Check cord sets or extension cords  

 

extension cords. 

capabilities in section Controls;   

 

 

Cable Size in this manual. 

 

 

Consult John Deere Customer    

   Service.