Miller Electric Welder/Generator 사용자 설명서
Quick
Specs
Specs
Weld meters — digital ammeter
and presettable voltmeter allow
monitoring of welding output for
each welder.
and presettable voltmeter allow
monitoring of welding output for
each welder.
Multi-arc welding is here! One
dependable engine and two high-
performance arcs allow operators
to work independent of each other.
It’s a one-of-a-kind, go-anywhere
engine drive.
dependable engine and two high-
performance arcs allow operators
to work independent of each other.
It’s a one-of-a-kind, go-anywhere
engine drive.
Miller Du-Op
®
Engine-Driven
Welder/Generator
Issued May 2008 • Index No. ED/10.9
Thermal overload protection
prevents machine damage if the
duty cycle is exceeded or airflow
is blocked.
prevents machine damage if the
duty cycle is exceeded or airflow
is blocked.
Two 14-pin remote controls can
be used for precise adjustment
of amperage or voltage along
with contactor.
be used for precise adjustment
of amperage or voltage along
with contactor.
Increase profits with this multi-arc
machine by completing even your
most demanding jobs in half the
time compared to conventional
engine-driven welders. With two
arcs in one engine drive, fewer
machines are required for a job.
machine by completing even your
most demanding jobs in half the
time compared to conventional
engine-driven welders. With two
arcs in one engine drive, fewer
machines are required for a job.
Double the amperage output
with a switch that parallels both
outputs to a single side. This
provides a safe and easy way to
run large electrodes, stud weld,
or carbon-arc gouge.
with a switch that parallels both
outputs to a single side. This
provides a safe and easy way to
run large electrodes, stud weld,
or carbon-arc gouge.
5,500 watts of AC generator
power independent of welding
output. Two 120 V, 20 A GFCI
duplex receptacles. Two 230 V,
20 A duplex receptacles.
power independent of welding
output. Two 120 V, 20 A GFCI
duplex receptacles. Two 230 V,
20 A duplex receptacles.
Hot Start
™
provides positive stick
electrode starts to make it easy
to start all types of electrodes.
to start all types of electrodes.
The Power of Blue
®
.
Welder/generator is warranted by Miller for 3 years, parts and labor.
Engine is warranted by Deutz for 2 years.
Miller Electric Mfg. Co.
An Illinois Tool Works Company
1635 West Spencer Street
Appleton, WI 54914 USA
1635 West Spencer Street
Appleton, WI 54914 USA
Web Site
www.MillerWelds.com
International Headquarters
Phone: 920-735-4505
USA FAX: 920-735-4134
Canadian FAX: 920-735-4169
International FAX: 920-735-4125
USA FAX: 920-735-4134
Canadian FAX: 920-735-4169
International FAX: 920-735-4125
Heavy Industrial Applications
Pipe Welding
Structural
Structural
Processes
Stick (SMAW)
MIG (GMAW)
Flux Cored (FCAW)
DC TIG (GTAW)
Air Carbon Arc (CAC-A)
MIG (GMAW)
Flux Cored (FCAW)
DC TIG (GTAW)
Air Carbon Arc (CAC-A)
Single Weld Mode:
3/8 in (9.5 mm) Carbons
Dual Weld Mode:
1/4 in (6.4 mm) Carbons
3/8 in (9.5 mm) Carbons
Dual Weld Mode:
1/4 in (6.4 mm) Carbons
Output Range
Single Weld Mode: (Right side) CC/DC 30 – 600 A
Dual Weld Mode: (Both sides) CC/DC 15 – 300 A
Dual Weld Mode: (Both sides) CC/DC 15 – 300 A
CV/DC 10 – 32 A
Weld Output Rated at 104°F (40°C)
Single Weld Mode: 550 A at 30 VDC, 40% Duty Cycle
Dual Weld Mode: 275 A at 31 VDC, 40% Duty Cycle
Dual Weld Mode: 275 A at 31 VDC, 40% Duty Cycle
Generator Output Rated at 104°F (40°C)
5,500 Watts Peak — 4,000 Watts Continuous
Weight
Net: 2115 lb (959 kg) Ship: 2150 lb (975 kg)
Arc control (DIG) allows the arc
characteristics to be changed for
specific applications and electrodes.
Smooth running 7018 or stiffer,
more penetrating 6010 electrodes.
characteristics to be changed for
specific applications and electrodes.
Smooth running 7018 or stiffer,
more penetrating 6010 electrodes.