Crestron electronic TPMC-4XG-B 사용자 설명서

Crestron TPMC-4XG-B 

 

Isys i/O™ Handheld WiFi Touchpanel

NOTE:  Required for operation with a Crestron control system. 

ETHERNET

PC RUNNING

CRESTRON TOOLBOX

TPMC-4XG-B

 

•  Establish wireless communication between TPMC-4XG-B and PC via the 

WAP. 

•  Enter the IP address, IP mask, and default router of the TPMC-4XG-B via 

the Crestron Toolbox (Functions | Ethernet Addressing); otherwise enable 
DHCP.  

•  Confirm Ethernet connections between TPMC-4XG-B and PC.  
•  Use the Address Book in the Crestron Toolbox to create an entry for the 

TPMC-4XG-B with the TPMC-4XG-B’s TCP/IP communication 
parameters.  

•  Display the “System Info” window (click the 

 icon) and select the 

TPMC-4XG-B entry.  

•  Use the Crestron Toolbox to create the TPMC-4XG-B IP table.  

Select Functions | IP Table Setup. 

⇒ 
⇒ 

⇒ 

Add, modify or delete entries in the IP table. The TPMC-4XG-B 
can have only one IP table entry. 

A defined IP table can be saved to a file or sent to the device. 

•  Edit the control system’s IP table to include an entry for the TPMC-4XG-B. 

The entry should list the TPMC-4XG-B’s IP ID (specified on the  
TPMC-4XG-B’s IP table) and the internal gateway IP address 127.0.0.1. 

•  To prevent interference with other 802.11 devices that may be operating 

nearby, channels should be adequately spaced when configuring your 
wireless network; channels 1, 6, and 11 are the only non-overlapping 
channels. Refer to the information supplied with the WAP for instructions 
concerning channel selection. 

Program, project or firmware files may be distributed from programmers to installers 
or from Crestron to dealers. Firmware upgrades are available from the Crestron 
website as new features are developed after product releases. One has the option to 
upload programs and projects via the programming software or to upload and 
upgrade via the Crestron Toolbox. For details on uploading and upgrading, refer to 
the SIMPL Windows help file, VisionTools Pro-e help file or the Crestron Toolbox 
help file. 

  If a SIMPL Windows program is provided, it can be uploaded to the control system 

using SIMPL Windows or Crestron Toolbox.  

  Upload the VisionTools Pro-e file to the touchpanel using VisionTools Pro-e or 

Crestron Toolbox. 

•  31