Grizzly H7859 사용자 설명서
-C
-
For Your Own Safety Read Instruction Manual
Before Operating This Equipment
The purpose of safety symbols is to attract your attention to possible hazard-
ous conditions. This manual uses a series of symbols and signal words which
are intended to convey the level of importance of the safety messages. The
progression of symbols is described below. Remember that safety messages by
themselves do not eliminate danger and are not a substitute for proper accident
prevention measures.
are intended to convey the level of importance of the safety messages. The
progression of symbols is described below. Remember that safety messages by
themselves do not eliminate danger and are not a substitute for proper accident
prevention measures.
Indicates a potentially hazardous situation which, if
not avoided, MAY result in minor or moderate injury.
It may also be used to alert against unsafe practices.
not avoided, MAY result in minor or moderate injury.
It may also be used to alert against unsafe practices.
Indicates a potentially hazardous situation which, if
not avoided, COULD result in death or serious injury.
not avoided, COULD result in death or serious injury.
Indicates an imminently hazardous situation which, if
not avoided, WILL result in death or serious injury.
not avoided, WILL result in death or serious injury.
This symbol is used to alert the user to useful infor-
mation about proper operation of the equipment.
mation about proper operation of the equipment.
SECTION 1: SAFETY
NOTICE
1. DRILL INSPECTIONS: Perform
drill inspections and maintenance
service promptly as required.
service promptly as required.
2. DO NOT FORCE TOOL. It will do
the job better and safer at the rate
for which it was designed.
for which it was designed.
3. KEEP WORK AREA CLEAN.
Cluttered areas and benches invite
accidents.
accidents.
4. SHARP SURFACES: DO NOT
place hands near, or in contact with,
cutting surfaces during operation.
cutting surfaces during operation.
5. DO NOT USE IN DANGEROUS
ENVIRONMENT. Do not use pneu-
matic tools in damp or wet loca-
tions, or where any flammable or
noxious fumes may exist. Keep
work area well lighted.
matic tools in damp or wet loca-
tions, or where any flammable or
noxious fumes may exist. Keep
work area well lighted.
6. KEEP CHILDREN AND VISITORS
AWAY. All children and visitors
should be kept at a safe distance
from work area.
should be kept at a safe distance
from work area.
7. REMOVE ADJUSTING KEYS AND
WRENCHES. Form habit of check-
ing to see that keys and adjusting
wrenches are removed from tool
before operation.
ing to see that keys and adjusting
wrenches are removed from tool
before operation.
Safety Instructions for Hand Drills