Festool PD561438 사용자 설명서

To prevent unexpected start-ups, the power switch has an 

integral safety interlock. Before the saw can be started, the 

plunge release must be engaged. 
1.  Insert the Plug-it cord into the saw with the keyway lined 

up with the key, and twist the end to lock it in place. 

2.  Press up on the plunge release lever. 
3.  Pull back on the power trigger. 

 

The outrigger splinter guard is used when the cut to the 

right of the blade needs to be chip-free. When not in use, 

the outrigger can be raised out of the way. For bevel cuts, 

the outrigger is easily removable.  
1.  Remove the thumbscrew from the outrigger and slide 

the outrigger on to the front edge of the blade cover as 

shown. 

14 

TS 55 EQ Circular Saw 

2.  Insert the thumbscrew through the outrigger, through 

the height adjustment slot, and into the captive nut on 

the back side of the outrigger. 

 

3.  Place the saw on the guide rail, on the workpiece, and 

lower the splinter guard down to the surface of the 

workpiece. 

4.  Tighten the thumbscrew.  

► 

Inspect the bottom of the outrigger for burrs that could 

scratch the workpiece. 

► 

Remove the outrigger when making bevel cuts. 

► 

For plunge cuts, there is an index mark to indicate the 

blade position when the blade is at full depth.