John Deere HR1-20E 사용자 설명서

4 

 

 

 

                 

 Electric Air Compressor Manual

WARNING:  When using this product, basic precautions should always be observed, including the following:

READ ALL SAFETY INSTRUCTIONS BEFORE USING AIR COMPRESSOR

Make sure the air compressor is 

plugged into a properly grounded 

outlet which provides correct voltage 

and adequate fuse protection.  

Disconnect when not in use.

Check power cord for signs of 

crushing, cutting or heat damage.  

Replace faulty cord before use.

Keep all connections dry and off 

the ground.  Do not allow electrical 

cords to lay in water or in such a 

position where water could come 

in contact with them.  Do not touch 

plug with wet hands.

Do not pull on the electrical  cord to 

disconnect from the outlet.

Never operate air compressor in wet 

conditions or outdoors when it is 

raining.

Never operate air compressor with 

safety guards removed or damaged.

Any electrical wiring or repairs 

performed on this air compressor 

should be done by Authorized 

Service Personnel in accordance 

with National and Local electrical 

codes.

Before opening any electrical 

enclosure, always shut off the air 

compressor, relieve pressure and 

unplug the air compressor from the 

power source.  Allow air compressor 

to cool down.  Never assume the air 

compressor is safe to work  on just 

because it is not operating.  It could 

restart at any time!  Service in a 

clean, dry, flat area.

Serious injury or death could occur 

if the air compressor is not properly 

grounded.  Your air compressor 

is powered by electricity and may 

cause electric shock or electrocution 

if not used properly.

Electrical shock may occur from 

electrical cord.

Electrical shock may occur if air 

compressor is not operated properly.

Serious injury or death may occur if 

electrical repairs are attempted  by 

unqualified persons.